DM9010 2CH CCT LED Color Temperature Dimmer 2CH RF LED Wireless Touch Panel RF Controller
Touch Panel RF Controller
dmx512 decoder led driver dmx512 decoder led driver
DM9010 Full Touch LED color temperature controller(C&T controller) is a universal high performance C&T controller, which adopted the most advanced PWM (Pulse-Width Modulation) digital brightness-adjusting.Changing the color temperature by adjusting two different light colors, it suits for all 2 channels LED lights, for example LED panel lights, LED Strips, LED Modules.
Features of 2CH RF LED Wireless Controller DM9010:
1. Automatically adapt to LED works at DC12V-24V.
2. ON-OFF controller function
3. 2 channels for LED lights controlling, 10A per channel, totally Max 20A.
4. Changing the color temperature by adjusting two different light colors.
5. Color temperature and brightness adjustments.
6. Power off memory function.
7. Can custom-made as demands and 3 years warranty.
Specification of 2CH RF LED Wireless Controller DM9010:
1.RemoteTouch Dimmer Specifictions | |
Input Voltage | DC3V(CR2032) |
RFID | 433.92MHz |
Operating Method | Touch |
2.Controller Specifictions | |
Input Voltage | DC12-24V |
Output Signal | Constant Voltage PWM Signal |
Channels | 2CH |
Current | 10A*2CH Max 20A |
RFID | 433.92MHz |
Control Distance | ≤20 m |
Working Temperature | -30~70℃ |
Size | L115*W59*H9(mm) |
Operating Instructions of DM9010:
The remote control ID learning guide: Wake Up the remote, Press (D) button, Then Power on the controller, the light on controller slow flashes 3 times, the ID is set.
The remote control ID clearance guide: Wake Up the remote, Press (D) button, Then Power on the controller, the light on controller slow flashes 6 times, the ID is clearance.
NOTE:
1. Touch Ring,Left brightness adjusting from Down (Min. BRT) to UP (Max.BRT), 1%--100% 20 levels brightness control.Right Color-Temperature adjusting from Down(Cool) to UP(Warm), 11 levels control.
2. Power off memory function.
3. All above operating on condition Touch remote wake up.
4. The remote Sleep function: 30seconds without operating, lengthen battery working life. Press (H) to wake up.
Wiring Diagram of 2CH RF Wireless Controller of DM9010:
Warm Notice:
1. In 3 seconds of the remote installed battery, please do not touch any keys.
2. If Brightness Control Touch Ring desensitizing, please remove and reinstall the battery.