DLSEALS Various color flat plug sleeve square custom silicone products
1.Material: PU,Polyurethane,pp,pe,silicone,EPDM,NR,NBR,SBR,CR,IR,IIR,Viton,FKM,PVC,ABS and so on. |
2. Hardness: Durometer 40-85 Shore A |
3. Size: the same as your design, drawing or sample. |
4.Color: Black,white, Transparent,gray,green,yellow,blue,red etc. |
5.Logo & Printing: according to your request. |
6.Application: Auto, Household Appliances, Electronic products, Machine, Armarium, Toy etc |
DLSEALS Manufacturing technique:
1.Compression Molding: Pressure and heat are applied to material inside a mold cavity until it cures. This method can produce products that are curved or intricate and is usually less expensive than other molding processes.
2. Injection Molding: More complex than either compression or transfer molding, injection molding forces molten material into a mold cavity with a ram or screw-type plunger.
3. Transfer Molding: Similar to compression molding, except the material is forced into a mold cavity through a funnel, or sprue, where it takes on the shape of the cavity during cooling.
4.Liquid Injection Molding: A high-volume molding method where liquid silicone rubber is kept cool until it is forced into a heated cavity and vulcanized