MainFeature
Specifications
INPUT
DVB-S2 Tuner Input
Comply to DVB-S2,DVB/DSS standard.
Input frequency range: 950~2150MHz
RF Input level: -25~-65dBm
Symbol rate: 5~45Mbaud for QPSK
10~31Mbaud for 8PSK
Rolling-off factor: 0.35 for QPSK;
0.2 for DSS
0.35, 0.25, 0.2 for DVB-S2
Convolution code rate: 1/2, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 for S2 QPSK;
2/3, 3/4, 3/5, 5/6, 8/9, 9/10 for S2 8PSK;
1/2, 2/3, 3/4, 5/6, 6/7, 7/8 for QPSK
LNB Polarization Voltage: 1/13V/18V(optional),0/22KHz optional
Connector: F-Female, 75ohm
DVB-S Tuner Input
Input frequency range: 950~2150MHz
RF Input level: -25~-65dBm
Symbol rate: 2~45Mbaud
Rolling-off factor: 0.35
Convolution code rate: 1/2, 2/3, 3/4, 5/6, 7/8
Interleave depth: I=12
LNB Polarization Voltage: 0/13V/18V(optional), 0/22KHz optional
Connector: F-Female, 75ohm
QAM Tuner Input
Input frequency range: 50~860MHz
RF Input level: 45 ~ 75dBμV
Symbol rate: 1~7Mbaud
Demodulation: 16/32/64/128/256QAM
Connector: IEC-Female, 75ohm
DVB-T/T2 Tuner Input
Frequency range: 104~862MHz(VHF/UHF)
RF input level: -20~-70dBm
Constellation: DVB-T – QPSK, 16QAM, 64QAM;
DVB-T2 – QPSK, 16QAM, 64QAM, 256QAM
Bandwidth: 6/7/8MHz
FFT: DVB-T – 2K/8K;
DVB-T2 – 1K/2K/4K/8K/16K/32K
Guard Interval: DVB-T: 1/4, 1/8, 1/16, 1/32;
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128
FEC: DVB-T – 1/2, 2/3, 3/4, 5/6, 7/8;
DVB-T2: 1/2, 3/5, 2/3, 3/4, 5/6
Reflection loss: 7dB
Connector: F-Female
Impedance: 75ohm
MPEG TS Input
2+2*ASI input
Comply with EN 50083-9 standard
Max. bit rate: 170Mbps
Effective bit rate: 1~54Mbps
ASI format: Byte or Burst
MPEG frame: 188/204 byte
Return loss: >10dB
Connector: BNC, 75ohm
DS3 Input and loop out(optional)
Max. input bit rate: 44.736Mbps
Format: comply to G.804/G.752 standard
Connector: BNC, 75ohm
TS PROCESSING
Capable of re-multiplexing and de-multiplexing the TS from Tuner, DS3/E3(optional),ASI and TSoIP input.
Output the TS through 2+2*ASI port after the processing of de-multiplexing and re-multiplexing
PROGRAM AND PID PROCESSING
Re-multiplexing, filtering and re-mapping
PSI/SI PROCESSING
Capable of PSI/SI generating, NIT & SDT edit and LCN edit & re-generating.
DVB COMMON SCRAMBLING ALGORITHM
BISS mode: BISS-1, BISS-E
CI: 2*PCMCIA slots, compatible with major CA CAMs.
OUTPUT
MPEG TS Output
2+2*ASI output(backup out)
MPEG frame: 188/204 byte
Connector: BNC, 75ohm
Output Bit Rate ≤ 99Mb/s
TSoIP Input/Output
Connector: RJ45 100Base-T
Max. output bit rate: 70Mbits/s
UDP/RTP: Multicast or Unicast supported
Multicast control protocol: IGMPV2
HD MI Output
Connector: 1×HD MI, 1.3 interface(up to 1080i)
Resolution:1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94, 720p×50, 480p×60, 576p×50, 576i×25,
480i×29.97
Audio embedded channel: 2×Stereos or digital audio pass through
VIDEO OUTPUT
Analogue Video Processing
1*YPbPr, RCA interface,75Ω
1*CVBS, BNC/RCA interface,75Ω
Standard: NTSC, PAL and SECAM
Resolution of YPbPr: 1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94, 720p×50, 480p×60, 576p×50,
576i×25,480i×29.97
Video output level: I.0 Vp-p±5%(with standard test stream)
Frequency Response <±1 dB,at 5.5 MHz(PAL/SECAM), 4.2MHz (NTSC),15MHz(HD YPbPr)
Chroma-Luma Delay <±30 ns
Field Time Distortion <2%
Line Time Distortion <1%
Short Time Distortion <2%
Differential Gain <3%
Differential Phase <2°
Signal to Noise Ratio >55dB (luminance weighted)
Digital Video Processing
Standard: comply to MPEG-2(MP ML for SD, MP HL for HD)
MPEG 4/H.264 AVC Part 10(MP L3 for SD, HPL4.1 for HD)
1+1*HD/SD-SDI(mirrored), BNC interface,75Ω
SD Standard SMPTE 259M, 270 Mb/s (10bit)
HD Standard SMPTE 292M, 1.485 Gbit/s (10bit)
Resolution of SDI: 1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94, 720p×50, 576i×25, 480i×29.97
Video PID bitrate < 80Mbps
Video output level: 800mV p-p
AUDIO OUTPUT
Analogue Audio Processing
Balanced audio output: 2*XLR
Balanced audio connecter: 2*RS232 interface(enclosed XLR adaptor cables),600ohm impedance
Unbalanced audio output: 2*L/R
Unbalanced audio connecter: 2*RCA interface, 600ohm impedance
Audio mode: Left, Right, Dual Mono, Stereo
Cross Talk Among Channels >70dB
Total Harmonic Distortion <0.3% 400Hz, 1KHz test tone
Frequency Response ±0.5dB over 20Hz ~ 18KHz
Output Audio Level: 0dBm,600Ω, adjustable range ±10Db
Digital Audio Processing
Digital Audio output: 2*AES/EBU output
Digital audio connecter: 2*RS232 interface(enclosed AES/EBU adaptor cables)
Sampling rate: 32, 44.1 and 48KHz
Audio bitrate: 32Kbps, 64Kbps, 96Kbps, 128Kbps, 160Kbps, 192Kbps, 224Kbps, 256Kbps, 288Kbps, 320Kbps,
352Kbps, 384Kbps, 416Kbps and 448Kbps for MPEG-1 Layer I
32Kbps, 48Kbps, 56Kbps, 64Kbps, 80Kbps, 96Kbps, 112Kbps, 128Kbps, 160Kbps, 192Kbps,
224Kbps, 256Kbps, 320Kbps and 384Kbps for MPEG-1 Layer II
Audio output level: 1Vp-p (with standard test stream)
Load Impedance 110 Ω (connect with AES/EBU adaptor cables)
BASEBAND DATA OUTPUT
Subtitle: DVB, EBU
VBI data: Teletext, WSS, VFD, VPS
Closed Caption: EIA 608, EIA 708, EIA 608-to-708
GENERAL OPTIONS
Control and Monitoring
Remote control network, SNMP supported
Local control: management via Front panel and LCD
Physical and Power
Voltage: 90~260VAC, 50/60Hz
Consumption: 40W
Operating temperature: -10~50ºC
Humidity: 10~90% (non-condensing)
Dimensions: 430mm(W)*400mm(D)*45mm(H)
Weight: 5Kg
Overview
Conforming to MPEG-2(MPML), DMB-9020 HD Professional IRD supports DVB-S2 Tuner standard, and adopts high-quality decoding of MPEG-2, MPEG-4, and H.264 in broadcast level. Its CI descrambling module is able to work with variety of Conditional Access Systems. With distinctive digital decoding technology and dual PCMCIA interfaces, DMB-9020 is able to receive all kinds of cryptographic digital TV signals from satellite, cable or terrestrial by changing different PCMCIA modules.
Configured with various input and output interfaces, DMB-9020 is able to deal with SDH network signals and output transport streams via DS3 adapter module(optional), with DS3 loop out functions furthermore. The device supports TS over IP output. It is easy to operate, and realize remote control and parameter configurations by Ethernet network management. Meanwhile, it is featured with interfaces for analogue composite signals (CVBS), YPbPr, BNC video out port, SDI, HD MI, and AES/EBU audio interfaces. DMB-9020 HD Professional IRD characterizes in high transmission rate, low bit error rate(BER), and standard designed for 19’’ rack mounting. It is quite an ideal choice and application for any digital TV head-end systems.