SPECIFICATIONS | UNIT | DHD-12L |
Material | — | PE、PP… |
Max container capacity | L | 12 |
Number of die | set | 1、2、3、4、6 |
Total weight | ton | 10 |
Machine dimension(L×W×H) | m | 4.1X2.5X3 |
ACCUMULATOR HEAD | ||
Number of die heating | zone | 3 |
Power of die heating | KW | 6-7 |
Max die-pin diamenter | mm | 180 |
Center distance of twin-die | mm | 240 |
Center distance of tri-die | mm | 160 |
Center distance of four-die | mm | 120 |
Center distance of five-die | mm | — |
Center distance of six-die | mm | 85 |
CLAMPING UNIT | ||
Clamping force | KN | 110 |
Platen opening stroke | mm | 219-600 |
Platen size | mm | 460×500 |
Max mould size(W×H) | mm | 560×500 |
Mould thickness | mm | 220-320 |
EXTRUDER UNIT | ||
Screw diameter | mm | 80 |
Screw L/D | L/D | 25:1 |
Extruding volume | Kg/hr | 130-160 |
Number of heating zone | zone | 4 |
Extruder heating power | KW | 8.2-9.3 |
Extruder driving power | KW | 37 |
POWER | ||
Oil pump driving power | KW | 15-22 |
Fan power for screw | KW | 0.6 |
Servo driving power | KW | — |
Total power | KW | 67 |
Air pressure | Mpa | 0.6 |
Air consumption | m³/min | 1 |
Average energy consumption | KW | 35 |
Cooling water consumption | m³/min | — |