DF241 High-Temperature High-Pressure Dyeing Machine
Introduction:
The unit is for boiling , bleach, dyeing ,washing of cotton ,wool ,synthesize fiber , and cone yarn , hank yarn or zipper tape.
| Model | DF241-5~1000 |
1 | Max Operating Volume | 5kg~1000kg |
2 | Max Operating Temperature | 140℃ |
3 | Max Operating Pressure | 0.39Mpa |
4 | Dyeing Match Proportion | 1:12~1:15 |
5 | Motor Power | 3kw~55kw |
6 | Dyeing Liquid Pump | Centrifugal and Mix flow pump |
7 | Heating mode | Indirect steam heating and heat preservation |
8 | Material | Stainless steel of 1Cr18Ni9ti or 316L |
9 | Control mode | automatism |
Parts | DF-10 | DF-25 | DF-30 | DF-50 | DF-100 | DF-200 | DF-300 | DF-500 | |||
dye box | mm diameter | φ450 | φ500 | φ600 | φ900 | φ1200 | φ1400 | φ1600 | φ1700 | ||
mm Height | 810 | 1350 | 1500 | 1500 | 1500 | 1500 | 1900 | 1900 | |||
Amount of the bar in dye box | 4 | 5 | 6 | 18 | 30 | 46 | 60 | 66 | |||
Bobbin qty of one bobbin holder | 3 | 5 | 6 | 5 | 5 | 6 | 7 | 9 | |||
m2 Surface area of heat exchange | 0.3 | 0.5 | 0.6 | 1.5 | 4 | 6.5 | 7.3 | 10.5 | |||
Diameter of cooling pipe | Dg20 | Dg25 | Dg25 | Dg25 | Dg25 | Dg32 | Dg32 | Dg32 | |||
Diameter of water inlet hoes | Dg25 | Dg50 | Dg50 | Dg50 | Dg65 | Dg80 | Dg100 | Dg100 | |||
Diameter of blow-in pipe | Dg20 | Dg25 | Dg25 | Dg25 | Dg25 | Dg32 | Dg32 | Dg32 | |||
mm Diameter of blow-off pipe and overflow tube | Dg40 | Dg50 | Dg50 | Dg65 | Dg80 | Dg100 | Dg100 | Dg100 | |||
KW Motor power | 4 | 5.5 | 7.5 | 11 | 15 | 30 | 37 | 55 | |||
Diameter of blow valve | Dg15 | Dg25 |
| ||||||||
steam gauge | Y100 0~1Mpa |
Structure Specification:
Diameter of main Frame: Ø2000mm
Material of main frame: stainless steel 321
Width of top end socket: § 8mm
Width of bottom end socket: § 8mm
Width of main frame (mm): § 8mm
Sealing method of main frame: self-sealing
Uncovering method: cylinder uncovering
Heater: stainless steel coil
Type: built-in
Steam pressure: 0.6Mpa
Specification of high temperature dyeing pump and motor:
1.Type: High temperature centrifugal pump (mixed-flow pump)
2.Motor power: 6—90KW
3.Motor origin: Nanjing Kongte Motor factory
Dye vat
Charge pumb power:2.2KW
Charge pumb origin:Wuxi Jiangping Pumb factory
Mixer power: 6—1.5KW
Electric control box
Shell material:stainless steel
Dyeing machine computer and origin: Foshan Hangxing Computer
Electrical appliance:DELIXI
Frequency converter:power frequency conversion(from Shenzhen)
Dye vat valve
Heating,cooling adopt stainless steel Y-valve
Inflow,draining(single in double drain)adopt pneumatic butterfly valve.
Sarong
1.Loose fiber carrier(2 dyeing carriers),each one equipped with 2 unloading bottom plates,punching 3mm.
2.Sarongdiameter: 1860mm.
Frame mouth sealing bag: silica gel seven-shape.