1.Direct lifting diaphragm construction with high frequency,10 times per seconds;Fountain solenoid valve
2.Applied to fountain system. Fountain solenoid valve
Body-Brass,Stainless steel , PA66(Nylon)
or Cast iron.
Seal- VITON,EPDM,NBR
Armature Tube-Stainless Steel 304
Plunger- Stainless Steel 430F
Stop- Stainless Steel 430F
Springs- SS304
Shading Rings- SS304
Medium: | Water, |
Temperature: | VITON Seal: -30℃ to 150℃ NBR Seal: -10℃ to 80℃ EPDM Seal: -10℃ to 120℃ |
Pressure: | 0-1.6 MPa |
Port Size: | 1/2'', 3/4'',1'', 1 1/4'', 1 1/2'', 2'' |
Port Thread: | G, BSP ,NPT,Flange |
Orifice(mm): | 15,20,25,32,40,50,65,80,100,125,150,200 |
Voltage: | DC - 12V,24V AC - 24V,120V,240V/60Hz;110V,220V/50Hz |
Coils: | F14B,26VA(AC),13W(DC),IP65,100%ED. SA11B,6.5W |
DHDF11 Series Normally Closed,With Coil F14B,DIN | ||||||||||||||||
Valve Body | Port Size | Orifice | Cv | Min Pressure (MPa) | Max Pressure(MPa) | Seal Material | Body Material | |||||||||
AC(26VA) | DC(18W) | |||||||||||||||
DHDF11015XXX | 1/2'' | 15 | 3.8 | 0 | 0.6 | 0.6 | NBR, EPDM, VITON | Brass, Stainless steel, Nylon | ||||||||
DHDF11020XXX | 3/4'' | 20 | 7.6 | 0 | 0.6 | 0.6 | ||||||||||
DHDF11025XXX | 1'' | 25 | 12 | 0 | 0.6 | 0.6 | ||||||||||
DHDF11032XXX | 1 1/4'' | 32 | 24 | 0 | 0.6 | 0.6 | ||||||||||
DHDF11040XXX | 1 1/2'' | 40 | 30 | 0 | 0.6 | 0.6 | ||||||||||
DHDF11050XXX | 2'' | 50 | 48 | 0 | 0.6 | 0.6 |
International advanced machinery
Skilled employees
high pressure test low pressure test
leak detection water hammer test lifecycle test
resistance test current test
power test temperature test noise test
1.English neutral packaging
2.with Darhor logo
3.with your logo (Charged)
Package more than 40kgs,use
Fumigated wooden case or pallet.
We will compensate to the damage!pls contact within 3 days when you receive.