5000 Watt Off Grid 5kw Low Frequency 48 Volt DC AC Solar Power Inverter
Feature:
|
Off Inverter Solar 96v 10KW Hybrid Pure Sine Wave 10KW 24V 48V Three Phase inverter
Inverter Solar 96v 10KW Hybrid Pure Sine Wave 10KW 24V 48V Three Phase inverter
Specification | |||||||
Model: HDSX | 80248/96/192 | 10348/96/192 | 12348/96/192 | 16396/192 |
20396/ 192 |
24396/ 192 |
|
Rated Power | 10KVA/8KW | 12.5KVA/10KW | 15KVA/12KW | 20KVA/16KW |
25KVA/ 20KW |
30KVA/ 24KW |
|
Peak Power(20ms) | 24KVA | 30KVA | 36KVA | 48KVA | 60KVA | 72KVA | |
Start Motor | 5HP | 6HP | 7HP | 10HP | 10HP | 15HP | |
Battery Voltage | 48/96/192VDC | 96/192VDC | |||||
Size(L*W*Hmm) | 725*365*1010 | ||||||
Packing Size(L*W*Hmm) | 785*425*1135 | ||||||
N.W.(kg) | 112 | 122 | 134 | 160 | 176 | 189 | |
G.W.(kg)(Wooden Packing) | 136 | 146 | 158 | 184 | 200 | 213 | |
Installation Method | Tower | ||||||
Parameter | |||||||
Input | DC Input Voltage Range | 10.5VDC-15VDC(Single battery voltage) | |||||
AC Input Voltage Range | 380Vac/400Vac±10%(customized 190Vac/200Vac) | ||||||
AC Input Frequency Range | 45Hz-55Hz(50Hz)/ 55Hz-65Hz(60Hz) | ||||||
Max AC charging current | 0-45A(Depending on the model) | ||||||
AC charging method | Three-stage (constant current, constant voltage, floating charge) | ||||||
Phase | 3/N/PE | ||||||
Output | Efficiency(Battery Mode) | ≥85% | |||||
Output Voltage(Battery Mode) | 380Vac/400Vac±10%(customized 190Vac/200Vac) | ||||||
Output Frequency(Battery Mode) | 50/60Hz ±1% | ||||||
Output Wave(Battery Mode) | Pure Sine Wave | ||||||
Output waveform distortion | Linear load≤3% | ||||||
Efficiency(AC Mode) | >99% | ||||||
Output Voltage(AC Mode) | Conforming to AC input | ||||||
Output Frequency(AC Mode) | Conforming to AC input | ||||||
No load loss(Battery Mode) | ≤2.5% rated power | ||||||
No load loss(AC Mode) | ≤2%rated power( charger does not work in AC mode) | ||||||
No load loss(Energy saving Mode) | ≤10W | ||||||
Phase | 3/N/PE | ||||||
Battery Type | VRLA Battery | Charge Voltage :13.8V; Float Voltage:13.7V(Single battery voltage) | |||||
Customize battery |
Charging and discharging parameters of different types of batteries can be customized according to user requirements be set through the operation panel) |
||||||
Protection | Battery undervoltage alarm | 11V(Single battery voltage) | |||||
Battery undervoltage protection | 10.5V(Single battery voltage) | ||||||
Battery overvoltage alarm | 15V(Single battery voltage) | ||||||
Battery overvoltage protection | 17V(Single battery voltage) | ||||||
Battery overvoltage recovery voltage | 14.5V(Single battery voltage) | ||||||
Overload power protection | Automatic protection (battery mode), circuit breaker or insurance (AC mode) | ||||||
Inverter output short circuit protection | Automatic protection (battery mode), circuit breaker or insurance (AC mode) | ||||||
Temperature protection | >90°C(Shut down output) | ||||||
Alarm | A | Normal working condition, buzzer has no alarm sound | |||||
B |
Buzzer sounds 4 times per second when battery failure, voltage abnormality, overload protection |
||||||
C |
When the machine is turned on for the first time, the buzzer will prompt 5 when the machine is normal |
||||||
Inside Solar controller (Optional) |
Charging Mode | MPPT or PWM | |||||
Charging current | PWM: 10A-60A(48V System); 50A/100A(96V System); 50A/100A(192V System) MPPT: 10A-100A(48V System); 50A/100A(96V System) |
||||||
PV Input Voltage Range | PWM: 60V-88V(48V System); 120V-176V(96V System); 240V-352V(192V System) MPPT: 60V-120V(48V System); 120V-240V(96V System); 240V-360V(192V System) |
||||||
Max PV Input Voltage(Voc) (At the lowest temperature) |
PWM: 100V(48V System); 200V(96V System); 400V(192V System) MPPT: 150V(48 System); 300V(96V System); 450V(192V System) |
||||||
PV Array Maximum Power |
48V System: 560W(10A)/1120W(20A)/1680W(30A)/2240W(40A)/2800W(50A) /3360W(60A)/4480W(80A)/5600W(100A); |
||||||
Standby loss | ≤3W | ||||||
Maximum conversion efficiency | >95% | ||||||
Working Mode | Battery First/AC First/Saving Energy Mode | ||||||
Transfer Time | ≤4ms | ||||||
Display | LCD | ||||||
Thermal method | Forced air cooling | ||||||
Communication(Optional) | RS485/APP(WIFI monitoring or GPRS monitoring) | ||||||
Environment | Operating temperature | -10℃~40℃ | |||||
Storage temperature | -15℃~60℃ | ||||||
Noise | 2000m(More than derating) | ||||||
Elevation | ≤65dB | ||||||
Humidity | 0%~95% ,No condensation |