Model | Unit | DBM-110B | ||
Travel | ||||
X-axis travel | mm | 2000 | ||
Y-axis travel | mm | 2000 | ||
Z-axis travel | mm | 1500 | ||
W-axis travel | mm | 550 | ||
Spindle | ||||
Spindle center to worktable surface | mm | 140~2140 | ||
Spindle nose to worktable center | mm | -125~1925 | ||
Spinde diameter | mm | 110 | ||
Spindle taper | BT50 | |||
Rotating spindle speed (standard) | rpm/min | 35~2500 | ||
Rotating spindle speed (optional) | rpm/min | 35~3500 | ||
Number of steps of rotating speed of spindle | 2 Steps | |||
Spindle drive mode | Belt | |||
Spindle motor | kw | Fanuc 22/26 | ||
Max.torque of spindle | Nm | 1155/1637 | ||
Worktable | ||||
Table size | mm | 1400*1600 | ||
Division angle | deg | 0.001° | ||
Reference aperture | mm | Φ140H7 | ||
Max. load on worktable | kg | 8000 | ||
T-shot | mm | 22H7*160*9 | ||
Precision | ||||
Positioning accuracy of rotary table | arc-sec | 10″ | ||
Repeated Positioning accuracy of rotary table | arc-sec | 4″ | ||
Positioning accuracy | mm | 0.015 | ||
Repeated Positioning accuracy | mm | 0.01 | ||
Drive Mode | ||||
XYZ-axis | Direct-drive | |||
W-axis | Belt-drive | |||
Y-axis counterweight | Hyd.type | |||
Feed speed | ||||
Cutting speed X/Y/Z/W | m/min | 10/10/10/6 | ||
Rapid traverse speed X/Y/Z/W | m/min | 10/10/10/8 | ||
Tool magazine(Optional) | ||||
Capacity of tool magazine | 40 | |||
Max. tool weight | kg | 25 | ||
Max. tool length | mm | 500 | ||
Max. tool diameter (no adjacent tool) | mm | Φ125/250 | ||
Others | ||||
Air pressure | kgf/cm² | 6 | ||
Voltage | kva | 65 | ||
Tank Capacity | L | 480 | ||
Floor area (length*width*height) | mm | 6750*6000*4800 | ||
Weight | kg | 31500 |