Laser scribing could be made with high precision and quick delivery, the minimum width is 0.10mm
Product Name | DBC Metallized Alumina/Al2O3 Ceramic Substrate |
Ceramic Layer Material | 96% Alumina/Al2O3 Ceramics |
Metallization Technology | DBC(Direct Bonding Copper) |
Ceramic Layer Thickness | 0.25~1.0mm |
Copper Layer Thickness | 0.1~0.6mm |
Working Temperature Range | -55~850℃ (inert gas condition) |
Surface State | Bare Cu/Ni-Plating/Au Plating |
Product Feature | Electrical insulation/ High thermal conductivity |
Usage | Thick film circuit, large-scale integrated circuit, hybrid IC, semiconductor package, chip resistor and other electronic industry fields |
96% Alumina Ceramic is commonly used for production of electric circuit ceramic substrates, it is most frequently used ceramic substrates becasue of its excellent advantages:
✔High mechanical strength and hardness
✔Good electrical insulation
✔Low dielectric constant and dielectric loss
✔Similar thermal expansion with Si
✔High thermal conductivity
✔Excellent corrosion resistance
✔Non-toxic
✔Available for surface metalization
Extra machining service: laser scribing/laser hole drilling/surface polishing/surface metalization could be made on alumina ceramic substrates.
Standard Dimensions
Thickness/mm | Length x Width /mm | ||||||||
0.385 | 76.2 x 76.2 | 101.6 x 101.6 | 114.3 x 114.3 | 130 x 140 | 140 x 190 | ||||
0.5 | |||||||||
0.635 | |||||||||
0.8 | |||||||||
1.0 |
Note: Customized dimensions are available, welcome to send your requirement details to us.
Material Properties
Item | Unit | 96% Alumina Ceramic |
Color | - | White |
Density | g/cm3 | 3.72 |
Moh's Hardness | - | 9 |
Flexural Strength | Mpa | 358 |
Thermal Conductivity (at 30℃) | W/mk | ≥24 |
Coefficient of Thermal Expansion (20-300℃) | 10-6/℃ | 8 |
Volume Resistivity | Ω.cm | 1014 |
Dielectric Strength | KV/mm | 17 |
Dielectric Constant (1MHz) | - | 9 |
Laser scribing could be made with high precision and quick delivery, the minimum width is 0.10mm
The minimum hole size of laser drilling is 0.2mm
Metalization could be made for DBC or DPC or PCB