HD-909A Cutting and Shaping Machine for Triodes
![Cutting and Shaping Machine for Triodes from China supplier](/public/media/LazyImage_placeholder.09bec84d.svg)
1. Product introduction:
1) Automatic cutting and shaping machine for bulk triodes. Suitable for mass production, saving manpower. (TO-92 package, TO-126, TO-220, TO-3P triode cannot share one device)
2) Adopt plane vibration feeding method to feed.
3) splitter positioning, high stability.
4) "The defect rate is reduced to the lowest point", and no need to change the mold during shaping.
5) It is for single type of component shaping, a set of mold can only make one shape.
6) Technical parameters: (different body and shape of components cannot share one machine, specified machine for its own purpose), standard machine makes 90 degrees shape, other new shapes need to be customized. One machine can only be used for one specified component.
2. Parameters of processing
![Cutting and Shaping Machine for Triodes from China supplier](/public/media/LazyImage_placeholder.09bec84d.svg)
![Cutting and Shaping Machine for Triodes from China supplier](/public/media/LazyImage_placeholder.09bec84d.svg)
3. Equipment parameters
Voltage :220V AC60Hz/50Hz
Dimensions: Approximately L1000 x W600 x H910mm
Weight: about 145kg
Efficiency :3300-3600 pcs/h
4. Processing samples
1. When shape and size of electronic components are different, it can’t share one machine.
2. When new shapes are different, cannot share one machine.
![Cutting and Shaping Machine for Triodes from China supplier](/public/media/LazyImage_placeholder.09bec84d.svg)
![Cutting and Shaping Machine for Triodes from China supplier](/public/media/LazyImage_placeholder.09bec84d.svg)