Customized explosion-proof Oil and gas Vapor Recovery System of Adsorption+absorption principle for Methanol gasoline Tar

Brief introduction

With the deterioration of the global environment and increasing awareness of environmental protection, Government has successively introduced a series of environmental protection policies. Mandatory regulations must set up an oil vapor recovery system to recycle the volatile oil vapor in storage tanks, loading and unloading facilities, and ship and other storage and transportation facilities to prevent atmospheric pollution.

According to the "Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution" and the "Safety Production Law of the People's Republic of China", it has fully achieved ((Standard for Emission of Air Pollution from Oil Storage Depots) (GB20950-2007), ((Emission Standard for Steam by Air Pollutants)) ( Gb20951-2007), ((Gas Station Air Pollutant Emission Standards)) (G B20952-2007), ((Petrochemical Industry Pollutant Emission Standards) (GB31571-2015) Standard Requirements, Ensure Stable Standard Compliance with Emission Standards, Ensure Stability Discharge Recovery system can be customized according to the emission standard of the country where user is located

Recovery system can be customized according to the emission standards of the country where user is located.

Activated carbon selective adsorption, to achieve the separate oil and gas from air. Activated carbon can be desorption regeneration, the use of dry vacuum pump vacuum process, desorption of oil and gas through the absorption tower for recycling. The absorbent used in the absorption tower is the low-grade gasoline or light diesel oil in the storage tank area. Kerosene may also be used

Adsorption + absorption device main configuration

The condensation + adsorption process combination first condenses the oil and gas to a -75C (dividable multi-stage cooling), the basic condensing and recovery of C3 and above alkanes, the recovery rate of 80-85%, a small amount of residual alkanes to the adsorption system adsorption recovery treatment, after adsorption Qualified air emissions are met; after desorption, a small amount of oil and gas returns to the system inlet loop. The recovery rate can reach more than 97%. The setting of cooling temperature is designed according to different working conditions.

1.Oil refinery, oil storage, product oil tanker oil and gas recovery system
2.Oilfield Associated Gas Recovery System
3.Separation and recovery of chemical gases such as benzenes and methanol
4.Gas separation, concentration control and recovery in chemical production
5.Environmental standards require strict control of gas emission limits

High return

Product advantages

The company has rich R&D and design experience in the structure of chemical armored products. The structure of the products is integrated, the equipment covers a small area and the installation is convenient. And equipped with a self-developed control system, can achieve full automation control to make the equipment run perfectly reflected;

Short process flow, simple process, easy operation andmaintenance.

Intuitive effect
The liquid state gasoline oil can be recovered immediately, and can be directly dispatched. The unit is equipped with a meter to display the oil and gas recovery in real time.

The oil and gas recovery process is all carried out at low temperatures. The lower the temperature, the lower the safety hazard of oil and gas generation. The system is equipped with multiple protections, all of which are equipped with explosionproof equipment, which reduces the safety hazard

The company has sales offices in various regions of the country and sets up a special sales service organization. The company will arrange related professionals to be responsible for the correct and timely use of the teaching. To prevent users from using improperly and cause unnecessary losses, during the use of the product The company will send related technical personnel to the grassroots to provide technical guidance to users. Make sure you are using this product to make it safe and secure for users.

Oil and gas recovery selection

HUBEI HONGYI ELECTRONIC&TECHNOLOGY CO.,LTD,in 2009,which covers an area of more than 3500 m2,has 4standard plants of over 6000 m2 in area,in which ,the building area of the office building ,R&D center,etc.is about 4500 m2,has more than 100 sets of nc press,nc bending machine,prectreatment system and spraying equipment that are the most advanced in china,a complete set of advanced online flow calibration system as well as a number of instrument and electronics testing equipment.We also lay emphasis on cooperation with the domestic and foreign excellent industrial control manufactures,and have established cooperation relationship with the design institutes of the Ministry of Chemical industry as well as the electronic control institutes of a number of universities.Through these cooperators,by combining our core products,we provide the users with the best system solutions.