FPGA programmable NIC, FPGA card,fpga card Xilinx, FPGA, Accelerating Card,fpga development board are normally customized. Please contact us for details.
Customizable FPGA Flow Accelerating Card based on Xilinx XCKU040-2FFVA1156-2I DDR4
The GA1004E is a high-speed data communication card independently developed based on the Xilinx Kintex UltraScale series of FPGAs.The product is a PCIe full height card for servers, work stations, and general purpose PCs.
The GA1004E uses the Xilinx Kintex UltraScale family of FPGAs. The Kintex UltraScale FPGA is a new 20nm FPGA that delivers high-end performance with a cost reduction of more than half. This family not only provides the high-performance 10.3Gbps serial connectivity, memory and logic performance required for a wide range of applications such as high-volume 10G optical wired communications equipment, but also provides the best balance of signal processing performance, power consumption and cost. The GA1004E high-speed data communication card fully supports the PCI Express 3.0 standard, providing stable and reliable high-speed transmission between the FPGA system and the host computer system. At the same time, GA1004E provides four SFP+ interfaces, each of which can meet the requirements of 10G Ethernet communication. It also provides a QSFP interface to meet 40Gbps communication needs.The GA1004E also integrates a DDR4 high-speed memory that supports up to 4GBytes.
1. Specifications
Product Name | Eight port 10G capture card |
Board Form | PCI Express card |
Form | Standard full height 8-lane PCIe card |
Heat dissipation | Radiator mode;Fan + Radiator mode |
Installation | Standard half-height and full-height hosts |
Interface | Four SFP+ |
One USB-Console | |
Port display | 10 Gigabit port Link display light |
10 Gigabit port ACT display light | |
USB-Console port Link display light | |
Structure size | L 197.1 mm x H 111.5 mm |
Weight | 230g |
PCIe peak bandwidth | 4800 MB/s |
Power consumption | Typical power consumption 25 W |
Bus introduction | |
Standard | PCI Express 3.0 is backward compatible with PCIe 2.0, Pcie 1.1 |
Link bandwidth | 8 lanes MODLE, 1, 2 or 4 lanes |
Link Rate | • 8.0 GT/s (PCIe 3.0) |
• 5.0 GT/s (PCIe 2.0) | |
• 2.5 GT/s (PCIe 1.0/ PCIe 1.1) | |
DMA | • 32- and 64-bit |
Board resource | |
Main chip | Xilinx XCKU040-2FFVA1156-2I (XCKU060-2FFVA1156I version available) |
Memory | • Default2 GByte |
•Data width 64-bit | |
•Operating frequency 1200Mhz(2400MT/s) | |
• Up to 4GByte | |
Start Flash | • Default 256Mbit |
• UP to 1024Mbit | |
EEPROM | • 8Kbit |
DIP switch | • 6-bit |
User button | • 2-bit |
Temperature sensor | • Monitoring range from -30 to +120 °C |
User LED | • 5-bit |
Extended IO | • 48-LVDS |
Software | |
Host operating system | Microsoft Windows 7 |
Ubuntu, RedHat, CentOS, Debain | |
Operating Environment | |
Environment temperature | 0 to +50 °C / +32 to +122 °F |
Environment humidity | 10 to 90% |
Storage temperature | -20 to +70 °C / -4 to +158 °F |
Storage humidity | 10 to 90% |
2. Product Show
Keywords: FPGA Network Card,FPGA Card,fpga development board, Marcas tarjeta de red, pcie card,40g pcie nic, 40Gigabit Ethernet NIC, Ethernet NIC, network adapter, network card, 40gbps network card, network card brands, fiber optic network card, server adapter card
3.Product diagram
4. Compatibility
All of GRT's products are open sourced, fully compatible with major brands' products and devices, such as Intel, Dell, Cisco, Finisar, Arista, HP, Mellanox, Juniper, HUAWEI, H3C, etc.
For other brands' devices, please specify when ordering so that we can write corresponding codes for your easy application.
We can ship by TNT, FedEx, EMS, UPS, DHL, or other named forwarders as per your request.
GRT's products have been widely used in fields like network secutity, storage,server, telecommunication, finance, railway, military, oil, customs and water conservation, etc.
Based on the principle of Quality comes first, GRT holds a complete series of quality tests for all its products from material to finished product. Strict tests like adhesion test, current test, electrostatic protection, return loss test, temperature cycle aging test, data reducing, functional test,hardware test, communication test and flow test will be made before storaging and leaving factory.