Thickness (mm) | All | ≤20 | >20≤40 | >40≤65 | >65≤100 | >100 |
Carbon, max, % | 0.26 | 0.25 | 0.25 | 0.26 | 0.27 | 0.29 |
Manganese, % | - | - | 0.80-1.20 | 0.80-1.20 | 0.85-1.20 | 0.85-1.20 |
Phosphorus, max, % | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
Sulfur, max, % | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
Silicon, % | 0.40 | 0.40 | 0.40 | 0.15-0.40 | 0.15-0.40 | 0.15-0.40 |
Copper, min, % | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 |
Mechanical Properties | Metric | Imperial |
Tensile Strength, Ultimate | 400 - 550 MPa | 58 - 80 ksi |
Tensile Strength, Yield | 250 MPa | 36 ksi |
Elongation at Break (in 200 mm) | 20% | 20% |
Elongation at Break (in 50 mm) | 23% | 23% |
Modulus of Elasticity | 200 GPa | 29000 ksi |
Bulk Modulus (typical for steel) | 140 GPa | 20300 ksi |
Poissons Ratio | 0.26 | 0.26 |
Shear Modulus | 79.3 GPa | 11500 ksi |
Heat treatment methods and performances of A36 ms carbon steel plate:
A36 ms carbon steel plate is subjected to the normalization treatment at 899°C to 954°C that is at 1650°F to 1750°F, to annealing treatment at 843°C to 871°C that is at 1550°F to 1600°F, to stress relieving process at 677°C to 927°C that is at 1250°F to 1700°F, to carburizing process at 899°C to 927°C that is 1650°F to 1700°F and to hardening process at 788°C to 816°C that is 1450°F to 1500°F. Hardening process is strongly required when hardness and strength are the desired prime properties in design. Normalization treatment is done as the final treatment after the manufacturing process.
The properties of A36 ms carbon steel plate allow it to deform steadily as the stress is increased beyond its yield strength in order to allow the bridges, buildings and any other constructions to stand long enough by allowing the inhabitants to exit safely before any collapse takes place. A36 ms carbon steel plate has very good yield strength that is it has yield strength of 36,000 psi and it also has a high allowable bending stress of 22,000 psi.
A36 ms carbon steel plate advantages and usage:
A36 ms carbon steel plate is highly used in construction of oil rigs and in forming bins, tanks, bearing plates, rings, jigs, cams, forgings, templates, gears, base plates, stakes, fixtures, sprockets, forgings, brackets, ornamental works, stakes, agricultural equipment, automotive equipment, machinery parts and frames. A36 ms carbon steel plate is also used for various parts that are produced by flame cutting. The parts include walkways, boat landing ramps, parking garages, and trenches. The ductility of A36 ms carbon steel plate allows it to be used neither as cable nor as reinforcing bar. This steel is strictly regulated by ASTM that is by American Society for Testing and Lindenhurst health and fitness center Materials.
Why A36 ms carbon steel plate is the top rated material in constructions:
As we know, it is kind of carbon steel plate, so it’s not a expensive material which have very good performance and strengths to bear the various kind of system pressure. With high durability and even over period it could be recycled totally. Back to furnace and to make fresh steel products.
So, A36 ms carbon steel plate is the base material for all the constructions and structural, it has the wide range of applications and could be used for many purposes based on the thickness and corrosion resistance of the alloy.
As a matter of fact, a lot of the manufactured products that use this A36 ms carbon steel plate include warehouses, industrial and commercial structures, buildings (including pre-fabricated buildings), pipes, tubings, cabinets, enclosures, and housings.
Moreover, A36 steel could be made to various base construction materials.
ASTM A36 steel is generally available in the many forms i.e. it is available in rectangle bar, square bar, circular bar and also steel shapes like angles, H-beams, I-beams, and channels. This steel plate is also known as mild steel in South East Asian Region.
EU | USA | Germany | Japan | France | England | Canada | European old | Italy | Russia |
EN | - | DIN,WNr | JIS | AFNOR | BS | HG | EN | UNI | GOST |
S235JR | A283C | St37-2 | SM400A | E24-2 | 40A | 230G | Fe360B | Fe360B | St2ps |
SS400 | 40B | Fe360BFN | St2sp | ||||||
S235JRG2 | St3ps | ||||||||
St3sp | |||||||||
Belgium | China | Sweden | Austria | Norway | Spain | Inter | Portugal | India | |
NBN | GB | SS | ONORM | NS | UNE | ISO | NP | IS | |
AE235B | Q235B | 1311 | RSt360B | NS12123 | AE235B-FN | E235B | FE360-B | IS2062 | |
1312 | Fe360B |
1. Certificates: ISO, API, BIS, TUV, ABS, BV, LR, DNV GL, CCS, RMRS, RINA, etc.
2. Third Party Inspection: SGS, BV, Intertek; ABS,LR, DNV GL, NK, CCS, RMRS, RINA, KR.
3. Available Test: UT, MT, Impact Test, PWHT, etc.
4. Specification limit is matchless in China even in the World, typical examples:
The Min. thickness for shipbuilding steel plates is 3mm.
The Min. thickness for hot rolled steel plates is 0.6mm.
The Max. width for pressure vessel steel plates: exceeds 5000mm.
5. Lifetime warranty: BBN steel ensure to return and replace the steel products for free in its lifetime due to quality issues.
Q: Are you manufacturer or trader?
A: BBN steel is steel plate manufacturer.
We also has warehouse near Tianjin and Shanghai port. Abundant steel stocks can meet urgent demands of clients.
Q: Can you provide EN10204 3.2 MTC?
A: Yes.
Q: Can we get sample?Any charges?
A: Yes,you can get available samples in our stock. Free for real samples, but customers need to pay the freight cost.
Q: How can we get the offer?
A: Pease submit the required steel grade, size, quantity. And we will check price for you at the first time.
Q: What's your payment terms?
A: 30% down payment by T/T and 70% balance by T/T or L/C.
Q: What's your delivery time?
A: 15-45 days after receiving the down payment or L/C.
Q: Can you cut the steel plates to small pieces and drilling according to my drawing?
A: Yes. BBN Steel also provides steel machining: Grinding, Welding, Planing, Rolling, Punching, Milling, Cutting, Drilling, Turning.