Welcome to TradeChina
Custom pool drain grill cover supplier in Guangdong
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Custom Aluminum Drain Grate
• Rust proof • Light weight • Good quality • Different colour choices to suit application
• Top grate easily removed for cleaning • Good drainage • Easy to cut to desired length
1、Aluminum Drain Grate (With Vertical Slots)
Width | 80mm&customized |
Depth | 220mm&customized |
Slots | 42mm long × 4mm wide × 9mm spaced &customized |
Surface treatment | brushed and anodized finish |
2、Aluminum Drain Grate(Normal and Wide)
(with horizontal and round slots)
(with horizontal and round slots)
Normal
Wide
Compare
Width | normal: 80mm&customized wider: 110mm&customized |
Depth | normal: 220mm&customized wide: 260mm&customized |
Horizontal slots | mormal: 42mm long × 4mm wide × 10mm spaced wide: 72mm long × 4mm wide × 10mm spaced |
Round slots | diameter:4mm, 3mm spaced to horizontal slots |
Surface treatment | brushed finish&customized |
3、Insert Floor Drain (with vertical slots)
Width | 110mm&customized |
Depth | 140mm(from the bottom to the top of the upper lid) |
slots | 15mm long × 4mm wide × 10mm spaced |
Surface treatment | brushed finish |
Application Scenarios
The max length of our drain is 5.8 meter !
But you can cut every length you want!
How to cut the drain when it be installed around a corner?
STEP 1
Mark 5mm in from the edge of a slot and using your drop saw cut straight down (0°).
Mark 5mm in from the edge of a slot and using your drop saw cut straight down (0°).
STEP 2
Mark Now adjust drop saw angle to 45° (right hand side) and lock into place. Line up the blade of your saw to the bottom right hand
corner of the grate and secure grate before cutting.
Mark Now adjust drop saw angle to 45° (right hand side) and lock into place. Line up the blade of your saw to the bottom right hand
corner of the grate and secure grate before cutting.
STEP 3
Once angle has been cut, remove the top grate and replace with bottom tray. Cut again at a 45° angle and set aside.
Once angle has been cut, remove the top grate and replace with bottom tray. Cut again at a 45° angle and set aside.
STEP 4
Repeat steps 1 through 3 with new top grate and bottom tray flipped upside down.
Repeat steps 1 through 3 with new top grate and bottom tray flipped upside down.
STEP 5
Once all pieces are cut, line up together to see how the slots line up.
NOTE (Top tray only): You may need to trim a little more off one grate to achieve an even heart shape look. Once cut, to trim the grate further you will need to flip the grate over to avoid blade catching. (This relates mainly to 100mm wide grate).
Once all pieces are cut, line up together to see how the slots line up.
NOTE (Top tray only): You may need to trim a little more off one grate to achieve an even heart shape look. Once cut, to trim the grate further you will need to flip the grate over to avoid blade catching. (This relates mainly to 100mm wide grate).
Cut grate to desired length.
Tip: Cut angles first before you cut the grate to the length you need.
INSTRUCTIONS OF CUTTING & ASSEMBLY
1. Cut the bottom tray 2mm shorter than desired length to allow end caps to be fitted.
2. Cut the top grate 1mm shorter than the bottom tray to allow for easy install and removal of top grate.
3. Using a 40mm or 50mm hole saw, drill out drainage hole in the bottom tray only, at the required position depending on the location of the waste pipe.
4. Insert the end caps into the bottom tray and secure with a bead of silicone on the outside of the tray.
5. Place silicone around the lip of the pop waste and secure to the drilled hole on the underside of the bottom tray.
Our factory
Our customers
FAQ
Q1. Can we order special length for aluminum profile ?
A. Yes, any special length within 6 meters can be made upon your request.
Q2. Can you do OEM, how about the mould cost?
Q2. Can you do OEM, how about the mould cost?
A. OEM is welcomed. The mould cost depends on different design, we’ll evaluate per your drawing.
Q3. How do you pack the goods well?
A. Standard package: using thick carton box and products are wrapped well by quality EPE foam for oversea shipping.Pallet+ paper tube+carton box package upon request.
Q4. What's the delivery time?
A. Samples within 3-7 days; for bulk cargo, 5 days if have available items, otherwise 15-25 days.
Q5.Are you a manufacturer or a trade company?
A. we are manufacturer,also a trade company.we have our own factory,located in Foshan City,Guangdong Province ,China
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier