High Quality ISO 1161 Standard container corner castings , container spare parts
Part |
Descriptions |
Dimensions(mm) |
Material |
Door End |
ISO Corner Fitting, 8pcs/set |
178x162x118 |
SCW490 |
Door Hinge Set |
Blade, Pin, Lug, Bush |
|
|
Container Door Locking Device |
|
|
|
Door Gaskets |
1143x2254 |
EPDM |
|
Gasket Retainer |
|
SUS304 |
|
CSC plate |
0.8x100x200 |
SUS304 |
|
Door Panel (3 CORR) |
2.0X943X1957 |
CORTEN |
|
Door Vertical Member Edge SQ.Tube |
3.2x50x100x2260 |
CORTEN |
|
Door Horizontal Member Edge, Channel |
3.0x50x150x1024 or 943 |
CORTEN |
|
Door Sill |
4.5x158x150x2400 |
CORTEN |
|
Door Header Lower |
4.0x112.5x113x137.5x2400 |
CORTEN |
|
Rear Corner Post inner |
12x113x40x2353 |
CORTEN |
|
Rear Corner Post outer |
6.0x70x39x230x2400 |
CORTEN |
|
Front End |
Front End Panel |
2.0x1024x2400 |
CORTEN |
Front Corner Post |
6.0x209x225x2400 |
CORTEN |
|
Front Bottom Rail |
4.0X115X154x2400 |
CORTEN |
|
Top End Member SQ.Tube (Horizontal) |
3.0x60x60x2112 |
CORTEN |
|
Roof |
Container Roof Panel (5 CORR) |
2.0x1045x2356 |
CORTEN |
Door Header Upper (Extension Plate) |
3.0x388x2400 |
CORTEN |
|
Top End Rail (Extension Plate) |
3.0X397x2400 |
CORTEN |
|
Side |
Container Side Panel |
1.6x1116x2400 |
CORTEN |
Top Side Rail, SQ. Tube |
3.0x60x60x5702 |
CORTEN |
|
Ventilator Cover |
204x67x25 |
ABS |
|
Base |
Container Plywood Flooring, 19ply |
28x1160x2400 |
Hardwood |
Floor screw |
L=5 to 120 |
|
|
Bottom Side Rail |
4.5x50x162x30x5702 |
CORTEN |
|
Cross Member Small |
4x45x122x45x2350 |
CORTEN |
|
Cross Member Large |
4x45x122x75x2350 |
CORTEN |
|
Fork Pocket Bottom Plate |
360x300 |
CORTEN |
|
Fork Pocket Top Plate |
360x2350 |
CORTEN |
|
Gooseneck parts |
|
CORTEN |
|
Other |
Lashing Ring |
|
SS41 |
Hexagon Set screws Nuts and Bolts |
L=6 to 200 |
CORTEN |
|
Sealed pop rivet Blind rivet |
4.8*16.5 |
CORTEN |
|
Decals: Weight& Capacity, UIC, Container Type, Ower's Serious |
CORTEN |
||
Open Top Container: Header Hinge,Tarpaulin, Eyelet,TIR Cable, D-Ring |
|||
Flat Rack: Twistlocks |
20ft 40ft Cargo Containe Parts
One ISO container contains many parts, we could supply full sets of parts for 20ft and 40ft cargocontainer , here is the details
for the main structure:
Roof End: Roof Panel
Side End: Side Panel, Top Side Rail
Front End: Front Top End Rail, Front Bottom Rail, Front Corner Post, Corner casting, Front Hearder Plate
Rear End: Door Heard Upper and Lower, Door Sill, Rear Corner Post Inner and Outer, Double Door, Gasket, Corner Casting, Hinge set.
Bottom Base: Bottom Side Rail, Cross Memerber, Fork Lift Pocket.
Usually firstly producing these six parts, and then welding them together as one 20ft container. Finally, Painting, installing
rubber gaskets, CSC plate & placing the floor, etc.