USB Interface | ||
Type | Type A, USB full speed | |
Power Source | From USB | |
Speed | 12 Mbps | |
Firmware | Upgradable through USB interface | |
Interface Class | HID compliance | |
Cable Length | 1.5 m fixed cable | |
Contactless Smart Card Interface | ||
Standard | ISO-14443 A & B part 1-4 | |
Protocol | Mifare® Classic Protocols, T=CL | |
Smart Card Read /Write Speed | 106 kbps | |
Operating Distance | Up to 40 mm | |
Operating Frequency | 13.56 MHz | |
Contact Smart Card Interface | ||
Number of Slots | 1 or 2 ID-1 Slots | |
Standard | ISO/IEC 7816 Class A, B, C (5V, 3V, 1.8V) | |
Protocol | T=0; T=1 | |
Supply Current | Max. 50 mA | |
Short Circuit Protection | (+5) V /GND on all pins | |
Card Connector Type | ICC Slot 0: Landing | |
Smart Card Read /Write Speed | 9,600-115,200 bps | |
Card Insertion Cycles | Min. 200,000 | |
SAM Card Interface | ||
Number of Slots | 4 ID-000 slots | |
Card Connector Type | Contact | |
Standard | ISO/IEC 7816 Class B (3V) | |
Protocol | T=0; T=1 | |
Smart Card Read /Write Speed | 9,600-115,200 bps | |
Magnetic Stripe Card Interface | ||
Standard | ISO 7811 | |
Track 1/2/3, Bi-directional | ||
Reading | Supported | |
Built-in Peripherals | ||
Keypad | 17 keys | |
LCD Display | 128×64 dot-matrix LCD display with backlight | |
Buzzer | Monotone | |
LED Status Indicators | 4 LEDs for indicating status (from left most: blue, yellow, green, red) | |
PIN-pad Encryption | ||
Algorithm | DES/3DES | |
Standard | X9.8, X9.9 | |
Operating Conditions | ||
Temperature | 0°C – 50°C | |
Humidity | 5% to 93%, non-condensing | |
Certifications/Compliance | ISO/IEC 7816, ISO/IEC 14443, PBOC Level 1, PBOC Level 2 | |
Supported Operating Systems | Windows® XP, Windows® 7, Windows® 8.1, Windows® 10, Linux® |