EOS Product Overview:
WY-155GE Gigabit Ethernet over SDH (STM-1) provides a simple, cost effective and compact solution to convert 10/100/1000Base-T (Gigabit) data interface on the user side and transport Ethernet traffic over a STM-1 (155Mbps) SDH link and reconstruct the data back to ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100/1000Base-T (Gigabit) ethernet data over an STM-1 (155Mbps) SDH link. This Gigabit Ethernet over SDH (STM-1) equipment is a modular platform unit with two pluggable 155.52Mbps optical / electrical interfaces, which may be used in a point-to-point application to provide a compact, cost effective and flexible solution to deliver multiple Ethernet channels.
Gigabit Ethernet interface card along with Engineering Order Wire is available. The user removable / replaceable STM-1 Optical / Electrical interface option makes it easy to meet various and changing user requirements. Our Gigabit Ethernet over SDH Transmission Equipment provides full capability to cross-connect at E1 level between all tributaries. The equipment can be used as Terminal Multiplexer (TM) to build a point-to-point SDH transmission network.
The unit is available in a compact 1U (44mm high) box in a 19-inch rack mount chassis.
EOS Applications:
EOS Features and Highlights:
• Compact 1U height, 19-Inch standard chassis ideal for rack mounting
• Service interfaces:
o 2 x STM-1 optical interfaces, SFP optical module (LC connector)
o 2 x STM-1 electrical interfaces, SFP electrical module (Mini BNC connector) (optional)
o 2 x Gigabit Ethernet (electric) interface or
o 1 x Gigabit Ethernet (optical) interface (optional-extra)
• Management and Maintenance Interfaces
o TCP/IP Management Interface for Telnet and SNMP
o RS232 Serial Management Interface
o SNMP based NMS inbuilt with Windows XP / Windows Vista compatible Graphical User Interface (GUI)
o SNMP V2 Management and Monitoring
o Engineering Order Wire (EOW) Interface (RJ-11)
• Timing mode Synchronization with STM-1 line timing
o Looptimed from received STM-1 / External E1 / External Clock (2MBPS/2MHz)
o External timing source option - 120 Ohms 2MBps (External Bits Clock)
o External timing source - 120 Ohms 2MHz (External TTL Clock)
o Internal Clock - ITU-T G.813 internal oscillator
o The timing source can be auto-switched according to default or operator programmed settings
• 1 or 2 external Ethernet LAN ports and 4 internal Ethernet WAN ports
• Each WAN port employs a VCG channel
• Up to 48 VC12 bandwidth for each VCG and the total bandwidth is 63 VC12
assigned for 4 VCGs
• Provide two Gigabit Ethernet electrical interface or one Gigabit Ethernet optical interface as LAN interface (customer may use either 2 Gigabit electrical interfaces or 1 Gigabit optical interface, at any time)
• Ethernet electrical interface (RJ45 connector) supports 10/100/1000Base Tx with 10/100/1000Mb/s full duplex auto-negotiation data rate. User-configurable, with auto-negotiation support or forced mode.
• Ethernet Optical interface (SFP module) supports 1000Mb/s and automatic Laser Shutdown (ALS) function
• Supports 802.3/802.3u frame type and Ethernet II frame type
• Supports flow control and broadcast storm filtering control 802.3x
• Supports MAC address dynamic learning function
• Supports port-based VLAN and 802.1Q tag VLAN and 802.1p transparent.
• Supports GFP-F Encapsulation specification complying with ITU-T G.7041
• Supports VCAT specification complying with ITU-T G.707 and LCAS proposed in G.7042
• The maximum tolerated differential delay between any two VC-12 channels is 128 ms
• Provides both LCAS and Non-LCAS modes
• Supports automatic protection switching based on VC-12, in a ring network
• Supports device management based on CLI command and network management based on SNMP protocol
• Filtering and forwarding: 150,000 frames per second
• Buffer capacity: 210 frames
• Minimum Frame Size : 64 bytes
• Maximum Frame Size : 1536 bytes
STM-1 optical interface |
||
Optical port transmission rate |
155520kbit/s (STM-1, G.957, frame structure G.707) |
|
Interface code type |
In accord with the codes specified in G.957 |
|
Digital signals |
In accord with G.707,G.958 |
|
Light source |
LD |
|
Optical output power |
≥-9dBm (single-mode); ≥-12dBm (multi-mode) |
|
Receiving sensitivity |
≤-35dBm (BER≤10-11) (single-mode1310nm); ≤-25dBm (BER≤10-11) (multi-mode) |
|
Type of optical connector |
LC/PC |
|
Central wavelength |
850/1310/1550nm (varying from optical module) |
|
Transmission distance |
0~40km (40~120km to be customized) (single-mode); 0~2km (multi-mode) |
|
Ethernet electrical interface |
||
Interface features |
In accord with IEEE802.3 10/100/1000M Base-T/FL standard |
|
Interface type |
RJ45 |
|
User type |
10/100/1000M Base-T |
|
Transmission code rate |
1000Mbps |
|
Working mode |
Supporting full/semi duplex |
|
MAC address |
4K |
|
Min. frame size |
64 bytes |
|
Max. frame size |
1916 bytes |
|
Ethernet optical interface (optional) |
||
Interface features |
In accord with IEEE802.3 1000M Base-LX/SX standard |
|
Interface type |
LC |
|
User type |
1000M Base-LX/SX |
|
Transmission code rate |
1.25Gbps |
|
Management interface |
||
Interface features |
In accord with IEEE802.3u standard |
|
Interface type |
RJ45 |
|
User type |
10/100M Base-Tx |
|
Transmission code rate |
10/100M auto-negotiable |
|
Electrical characteristics |
||
Power supply |
AC220V/DC-48V |
|
Voltage fluctuation range |
AC165~265V/DC-36~-72V |
|
Power consumption |
<30W |
|
Ambient characteristics |
||
Service temperature |
-5°C~+50°C |
|
Storage temperature |
-25°C~+55°C |
|
Working humidity |
10~90%, without condensation |
|
Atmospheric pressure |
70~106kpa |
|
EMC |
||
In accord with GJB151A-97 and SC standard |