Conductive carbon paste
Carbon Conductive Ink is used to print contact areas on Contact Pad areas on e.g. Remote Control PCBs or on Mobile Phone PCBs (replacement of ENiG Surface Finish), to print switch contacts, shield areas, heating elements or as conductor in the cross over Technology (Crossing Tracks on single side PCBs). The high quality conductive inks of the series SAN201, especially its high conductivity and its excellent abrasion resistance provide excellent long term reliability results.
Carbon Conductive Inks Features and Benefits
- Excellent definition due to optimized Rheology
- Excellent adhesive strength and mechanical stability
- Resistant during HASL
- High chemical resistance
- Protecting during plating processes by peelable soldermask
Apply to :
1 bonding wafer/chip to the PCB
2 good adhesion on ceramic/metal/plastic
3 EL, FPCB,ITO(PET+alumina/glass)
4 membrane switch
Item | Standard |
Test result |
Colour | BLACK | BLACK |
Viscosity(25°C,VT04) | 300±10 PS | 250±50 PS |
Curing Conditions | 150°Cx 40min | 150°Cx 40min |
Adhesion | 100/100 | 100/100 |
Surface resistivity | <100Ω/ | <20Ω/(mm2) |
Hardness | ≥4H | ≥6H |
Solder resistance | 260°Cx5sec | 260°Cx5sec |
Uses | Screen printing | Screen printing |
Packing | 1kg/pot,or 5kg/pot | 1kg/pot |
Shelf life at 25°C | 6 months | 6 months |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier