Model |
ZFS-250D |
Voltage |
|
power |
11.5HP |
Engine |
188/DE |
Weight |
220KG |
Blades |
120 |
shafts of blade |
6 |
Work width |
250mm |
Work efficiency |
20--60㎡/hr |
Milling depth |
3--8mm |
The concrete scarifying machine are installed on an amount of shafts, can be changed conveniently, and be used for more purposes, such as cleaning, coarsing, milling, planning, and so on The control frame system is provided with self-locking function. The milling depth is controlled freely and the operation is flexible. The product has the function of dust collection
Concrete concrete scarifier diamond milling wheel hand push concrete scarifier has a great variety of applications: clean surface coatings, paints, and road markings, rough concrete for new layer, move
out epoxy, and creating non slip surface.
Q:What is the working depth and working width of HWS200?
A: The working depth is 0-5mm, which also depends on the floor condition. The working width is 300mm.
Q: As the cutters on the drum is 78pcs, is it enough for milling floor?
A: Usually it is enough, most of our customers use 78pcs; If you think it is not enough, we could add to 132pcs.
Q: What is the lifetime of the TCT cutters?
A: To be honest, it is hard to give a data of lifetime. It is because the floor condition varies different.
Q: Why the bearing needs to inject grease within 4 hours?
A: See the above explanation, please. It is very important.
Q: How to maintain the floor scarifier?
A: Grease the bearing within a few hours. This is very important. When it starts work, don't put down the drum suddenly. It is easy to break up.
Q: How about the quality of motor or gasoline engine?
A: The engine is Honda, made in China, but real Honda; the motor is made up of pure coppers, which we use it for many years.