TEREK Computer Safety valve test bench is a new type device designed and manufactured by our company, The structural design are compact, Combined the air driven liquid booster pumps,gas/nitrogen booster pump,Precision high pressure gauge,electro connecting pressure gauge ,needle valves ,control switches ,electromagnetic valve ,Pressure relief regulating valve ,Pneumatic control ball valve ,pressure transducer ,data acquisition system ,Hydraulic clamping device ,data printer and other precision accessories are assembled in the frame or closed cabinet.
TEREK always focuses on high-pressure fluid transportation and pressure testing equipment, providing perfect high-pressure fluid transportation solutions and services, and providing high-quality products and services is TEREK's eternal goal.
Model | TVT-40-DN400-CC |
Maximum outlet pressure | 480 bar |
Air drive pressure | 3-8bar |
Safety valve diameter | DN15-DN400mm |
Liquid booster pump Working medium | Hydraulic oil |
Gas booster pump Working medium | Air or Nitrogen |
Drive medium | Compressed air |
High pressure gas storage tank volume | 1L |
Maximum pressure of gas storage tank | 40MPA |
Drive air inlet size | ZG 1/2 |
High pressure outlet size | NPT1/4 |
Air consumption | 0.8-1.2 M³/min |
Noise | <75db |
<90% | |
Ambient pressure | 0.1Mpa |
Pipe material | Stainless steel high pressure pipe |
The safety valve test bench system is mainly composed of power system, valve clamping system, data acquisition and testing system, electrical control and
output system.
The main parts of the equipment are assembled in closed stainless steel cabinet or stainless steel frames. The pressure gauge,valve and pressure regulator will be mounted on the panel. The corresponding sign will also be marked on the panel.
Used for testing all kinds of safety valve, such as spring directly load safety valve, Power assisted safety valve, Supplementary loaded safety valve, fully open, slightly open, flange, thread type safety valve.
Safety valve test bench is to use high pressure air or nitrogen as the medium to test the sealing performance of the safety valve, jump pressure, back seat pressure, etc., for a variety of safety valve set pressure adjustment, set pressure test, discharge pressure test, back seat pressure test, test the pressure sealing performance of the safety valve, leakage rate.
1.Air driven gas or nitrogen booster pump is one core element of the machine, Booster pump is mainly to pressurize the low pressure nitrogen medium to high output pressure.
2.Pneumatic pressurization technology is used to stabilize the pressure without fluctuation, and the output pressure can be adjusted.
3.Automatic clamping system for quick valve installation and positioning.
4.Clamping pressure source pneumatic liquid booster pump, high pressure and stable output pressure.
5.All high pressure valves, pipelines and joints are made of stainless steel.
6.The clamping table adopts the three claws type, with stable output force and uniform pressure distribution
7.Low maintenance expense