Product Details | ||
Main Material | Epoxy, Epoxy Polyester, Pure Polyester, Acrylic, Polyurethane, etc. | |
Gloss | High Light, Flat Light, Matte, No Light | |
Texture | Sand, Wrinkles, Transparent, Hammer, Turtle, Cracks, Point Spread, Metal Effect, Antique, etc. | |
All the conditions of the gloss, texture, color, etc. of the powder can be customized. | ||
Application Conditions | ||
Applicable Equipment | High voltage electrostatic spraying, Friction electrification, Electrostatic fluidized bed, Corona electrostatic coating,etc. Depending on the situation | |
Coating Thickness | Used between 40-150 μm | |
Average Coverage | 10-12 m² / kg, coating thickness 60 μm (100% utilization) | |
Curing Condition | Standard type 180°C for 15 minutes | |
Physical Properties | ||
Specific Gravity | 1.4~1.8g/cm³, Depending on recipe and color | |
Particle Size | Standard type average particle size 35-40 μm | |
Coating Properties | ||
Mechanical Properties | Pencil hardness GB/T 6739-1996 H-2H | |
Adhesion (cross-cut method) GB/T 9286-1998 Grade 0 | ||
Bending test GB/T 6742-1986 ≤ 2mm | ||
Impact test GB/T 1732-1993 ≥50kg.cm | ||
Cupping test GB/T 9753-1988 ≥7mm | ||
Salt spray test GB/T 1771- 1991 >500 hours, no change, crossion width at crossing ≤ 2mm | ||
Damp heat test GB/T 1740-1979 >1000 hours, mild loss of gloss | ||
Temperature resistance 100°C/48 hours, excellent gloss retention | ||
Storage Conditions | ||
In dry, ventilated indoor storage, avoid direct sunlight, up to 12 months. |