Q1. Can I change the material of the stator and rotor? A1: The material texture is soft. If the acid content is high, the 304 material can be used. It is generally not recommended to change the rotor material.
Q2. How is the discharge temperature?
A2: When grinding nuts, beans, long-term work monomer colloid milling temperature is 70-80 degrees Celsius, double colloid milling temperature is 100 degrees Celsius.
Q3. How to clean the machine?
A3: Clean the machine with water, dry it with a high-pressure air gun, keep it dry in a dry place, check the machine regularly and apply oil on the machine.
Q4. How to grind repeatedly?
A4: The colloid mill grinding nozzle can be changed to the circulating return pipe. The circulating return pipe is provided with a three-way valve. It can be discharged or cycled as needed. All models can be changed. The 80 and 110 return pipes are 25mm in diameter, 130/. 180 return pipe diameter 32mm.
Q5. How often to replace the fixed rotor?
A5: The nut material is generally grind 100-200T, the rotor must be replaced, for other materials, according to the hardness of the material and equipment using frequency.
Q6. How to use the cooling nozzles?
A6: The machine should be used cooling nozzles first, then start to grind material.