Color sensor, KT6W-2P5116 Sick color mark sensor

SICK color mark sensor KT6W-2P5116, color sensor

• FEATURES
   

  Dimensions (W x H x D)	30.4 mm x 53 mm x 80 mm
  Sensing distance	10 mm
  Housing design (light emission)	Rectangular
  Sensing distance tolerance	± 3 mm
  Light source	LED, RGB 1)
  Wave length	640 nm, 525 nm, 470 nm
  Light emission	Short device side
  Light spot size	1.5 mm x 6.5 mm
  Light spot direction	Vertical 2)
  Adjustment	Teach-in button
  Teach-in mode	Static 2-point teach-in

  • 1) Average service life: 100,000 h at TU = +25 °C.
  • 2) In relation to long side of housing.

• MECHANICS/ELECTRONICS
   

  Supply voltage	10 V DC ... 30 V DC 1)
  Ripple	≤ 5 Vpp 2)
  Power consumption	< 40 mA 3)
  Switching frequency	5 kHz 4)
  Response time	100 µs
  Output type	PNP
  Switching output (voltage)	PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V
  Output current Imax.	100 mA
  Retention time (ET)	25 ms, non-volatile memory
  Connection type	Male connector M12, 4-pin
  Protection class	II 5)
  Circuit protection	UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression
  Enclosure rating	IP 67
  Weight	400 g
  Housing material	Zinc diecast

  • 1) Limit values when operated in short-circuit protected network: max. 8 A.
  • 2) May not exceed or fall below Uv tolerances.
  • 3) Without load.
  • 4) With light/dark ratio 1:1.
  • 5) Reference voltage DC 32 V.

• AMBIENT DATA
   

  Ambient operating temperature	–10 °C ... +55 °C
  Ambient storage temperature	–25 °C ... +75 °C
  Shock load	According to IEC 60068