The colored stamp concrete section structure include 5 layers:
1. surface sealing protectant
2. color release powder, stamp mould
3. color enhancer
4. base concrete
5. subgrade
Material List | Package | Dosage |
Color Enhancer | 30kg/bag | 3kg/m2 |
Coloring Mold Release Powder | 15kg/bag | 0.15kg/m2 |
Sealing Protectant | 20/50kg per bucket | 0.2kg/m2 |
Procedure | Construction Tips | Dosage |
Base Requirement | Pour concrete base, control the levelness, surface should be in in good roughness, strength should be above C25 | |
Color Enhancer | Paving the cement mortar on the surface, sprinkle the color enhanced powder on the initial setting, then smooth it | 3kg/m2 |
Coloring Mold Release Powder | When the surface reaches the fingertip, sprinkle with special mold release powder, and then carry out the mold removal after pressing | 0.15kg/m2 |
Washing | Washing evenly with the spray gun once or twice to achieve the same color | |
Sealing Protectant | Spray the surface with wear-resistant sealing protective agent, and maintain it for 2-3 days | 0.2kg/m2 |
Remark | 1. Stamp the mold evenly 2. The air humidity exceeds 80% or the high temperature is 38 degrees 3. No construction when temperature is 5 degrees. |