Thermal pigment is a thermochromic or "heat sensitive" pigment that looses its's color at specific temperature and warmer. You can use thermal pigment to paint over designs and patterns, once the pigment heats it will reveal what is underneath.
Thermochromic Pigment Color:Rose, bright red, golden red, golden, grass green, blue, sapphire blue orange, peacock green,yellow,
Temperature sensitive powder/thermochromic powder is a new generation of functional colorant.It features may vary with changes in ambient temperature and rapid change color,so that the color effect is a colored object dynamics.
Usage:This product can used for injection molding and extrustion process for producing a temperature change function of plastic products.
Performance:This product is in addition to rapid change color,sharp,colorful,achromatic complete and reversibility good,the more features are below:
High fineness:the average particle size of 6-9 um,400 mesh standard screen through rate is 100%.
High dispersion:special surface treatment process makes this product an excellent dispersion properties.
Heat resistance:The product has experienced 140 degree/30 minutes or 200 degree/10 mintue warm-up,with no obvious effect on the color performance.
Application Of Thermochromic Pigment :
Cosmetic color, nail polish, lipstick etc
Screen printing application
Applicable for offset ink
Security offset ink
Marketing, Decoration and Advertising purposes
Plastic Toys.
Use instruction
Temperature sensitive powder/thermochromic powder is a new generation of functional colorant.It features may vary with changes in ambient temperature and rapid change color,so that the color effect is a colored object dynamics.
1.Usage:This product can be used for injection molding and extrusion process for producing a temperature change function of plastic products.
2.Performance:This product is in addition to a rapid change color,sharp,colorful,achromatic complete and reversibility dgood,the more features are below:
High finenss:the average particle size of 6-9 um,400 mesh standard screen through rate is 100%
High dispersion:Special surface treatment process makes this product an excellent dispersion properties.
Heat resistance:The product has experienced 140 degree/30 mintues or 200 degree/10 mintue warm-up,with no abvious effect on the color performance.
3.Discolor temperature:This product is a hot achromatic type,reversibility temperature sensitive pigment,Colored state at low temperatures,when the temperature is rises to the set value,the pigment from the colored to the colorless:13-26 degree,7-31 degree,33-38 degree,43-45 degree,50-58 degree,63-75 degree.
4.Because of this series of thermochromic pigment is corlorless in the leuco state,It can be used with ordinary paint mixed colors,for example heat achromatic magenta (RX-MR) and ordinary skyblue color effect spell purple-light blue color can be obtainted,but with ordinary yellow mixed colors available red- yellow color effect.In addition,color pigments can also be used in conjuntion with different temperatures,in order to get richer color combinations.
Usage:
Scope:This product can be use in polyethylene(PE),polypropylene(PP),polystyrene(PS),sort polyvinyl chloride(S-PVC),AS and ABS and other transparent or translucent plastic injection molding ,extrusion forming. it can also be mixed with unsaturated polyester,exoxy,acrylic or nylon single body casting,molding,curing forming.
Dosage:For injection molding,extrusion molding process and casting,coining,curing.Temperature sensitive powder/thermochromic powder dosage for the amount of plastic is 0.4-2 %,usually 0.6-1.5%,discolor pigment and plastic particles should be mixed evenly.
Temperature:The processing temperature should be controlled below 180 degree,the max should not exceed 220 degree,and min materail heating time.(high temperature,prolonged heating will damage the color properties of the pigment.)
Notes:
1.when using the temperature sensitive powder plastics should not contain other fillers or ordinary paint(EG:titannium dioxide,calcium carbonate,carbon black,flame retardants),otherwise it wil cover the color the color effect.If it is with color pigment mixed colors,the ordinary pigment in an amount of about 0.5-2.5% color pigment.
2.Discoloration products should avoid strong sunlight and UV irradiration lights.
3.PVC resin in the formulattion should avoid using phosphorus-containing stabilizer and plasticizer,otherwise it would have a serious color injection products remaining at the achromatic color status.
The color of bright red also have another modle ,such as below:
Our company is Foshan Juliang Photoluminescent Pigment Co,Ltd was one higt-tech enterprise,which was founded in 2003 and located in Foshan city,China.We had been specializing in researching,developing and producing photoluminescent materials and auxiliary products for ten years .Our company's photoluminescent materials can last luminescence for 10 more hours after absorb visible lights for 20 minutes,which had been the national high-tech important project in 1999.Meanwhile we also research and develop other high-tech product such as Thermochromic material and Photochromic material ect.
After 10 years development,our products had been exporting to North America,Europe,Japan,Korean,Middle East and South East Asia area.We will insist on our mission as customer first,credit first and quality first and strive to be best supplier in photoluminescent materials area.
Packing Details : Inner packing: waterproof plastic bag.
Outer packing :Plastic drum or fiber drum.
We can prepare the difference package according to difference requirements from the customers
Delivery Details : Shipped in 5-7 days after payment
About delivery:
A: We are factory.
A: Generally it is 5-7 days if the goods are in stock. or it is 5-7 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.