Cold feeding rubber extruder for rubber hose
Cold feeding rubber extruder for rubber hose
Cold feeding rubber extruder can be used for the shaping extrusion of various kinds of rubber products, rubber products, rubber wrap up for the out layer of the wire and electric cable and it also can be an equipment to feed compound to the hot open mill and to do the rubber filter extrusion as well.
The feature of the equipment is that the fed rubber is not necessary to be hot milled. Cold feeding rubber extruder is suitable for processing natural rubber and various kinds of synthetic rubbers.
Cold feeding rubber extruder or pin-barrel type cold feeding rubber extruder mainly consists of the extruding part for materials feeding, reducer, motor and its speed adjusting system; and the temperature control system. Below is the main product parameters:
|
Item |
Screw Diameter (mm) |
L/D Ratio |
Maximum Screw Speed (r/min) |
Output (kg/h) |
Overall Dimension (mm) |
Weight (kg) |
|
XJW-60 |
60 |
10:1/12:1 |
80 |
75 |
1800x1310x1400 |
2500/2600 |
|
XJW-65 |
65 |
10:1/12:1 |
80 |
90 |
1800x1310x1400 |
2500/2600 |
|
XJW-75 |
75 |
12:1/14:1 |
80 |
140/160 |
2065x760x1164 |
3000/3200 |
|
XJW-85 |
85 |
12:1/14:1 |
65 |
230 |
2065x760x1164 |
3500/3600 |
|
XJW-90 |
90 |
12:1/14:1 |
60 |
260 |
3360x1350x1450 |
3600/3700 |
|
XJW-120 |
120 |
12:1/14:1 |
55 |
520 |
3750x1600x1550 |
6200/6500 |
|
XJW-150 |
150 |
12:1/14:1 |
45 |
800/830 |
5200x1650x1600 |
6800/7100 |
|
XJW-200 |
200 |
12:1/14:1 |
33 |
1600/2500 |
7150x1950x2300 |
8000/9000 |
|
XJW-250 |
250 |
12:1/14:1 |
26 |
3000/4200 |
8500x2450x2600 |
12000/13000 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier