Cold Room Freezer Sandwich Panels and other Refrigeration
PU insulation panels for Customs cold rooms
As the important component of the standard size Customs coldrooms, OnlyKem Brand PU Panels are designed and manufactured with detailed consideration for installation and maintenance. Followed are some instructions:
1.Before the installation, make sure that the locking devices are at the stop position. To do so, turn the locking devices counter-clockwise, using a wrench with force, until it stops.
2.Push panels together and turn wrench 1/4 turn clockwise. This will engage the male locking device ‘arm’ over female locking device ‘pin’.
3. Keep turning the wrench for another turn until the wrench stops. If there are any problems during the operation of cam locks, turn the wrench counter-clockwise with force until it stops moving any further. This will put the locking device at its original position and you can try to assemble the panel again by moving the wrench in a clockwise direction.
Refrigeration unit for Customs cold rooms
Condensing unit (also called compressor unit) is the most important part of whole coolrooms. A condensing unit typically is a high side assembly of a refrigeration system. It is an assembly of compressor, condenser, fan motor, controls and a mounting plate. It has the function of a heat exchanger to cool down and condense the incoming refrigerant vapor into liquid and a fan for blowing outside air through the heat exchanger section to cool the refrigerant inside. Condensing units have various designs and come in many sizes ranging from small household appliance units to very large industrial units used in food and manufacturing processes. OnlyKem Condensing unit is the optimized combination of efficiency, reliability, easy installation and sound performance. It is optimized designed and manufactured to reduce installation and maintenance costs, more efficient while making your production even more efficient and less noise impact for neighborhood. |
||
|
||
Unit Cooler (also called air cooled evaporator) is commonly used for optimal distribution of cooled air in coolrooms, it is one of the important component of in the coolrooms. OnlyKem unit coolers are designed and manufactured for larger coolrooms, they may also be utilized in warehouse and other coolrooms applications in the commercial and industrial refrigeration markets. Our unit coolers are constructed of a heavy-gauge, smooth finished aluminum cabinet or galvanized steel with a copper coils, aluminum plate fin foils and permanently lubricated ball bearing fan motors with inherent thermal protection. These draw-through units are designed for ceiling mounting in cold rooms and are available in air defrosting, electric defrosting and hot gas defrosting configuration, the heat exchange with internal CE certificate cold room can be achieved through inner low temperature refrigerant. OnlyKem had designed 6 series, more than 100 standard models air coolers to satisfy your demands with 15 years of experiences. ODM and OEM are also available . |
||
|
Plywood package with pallets. | Plywood package with pallets. |
Q1,What information should I let you know if I want to get a quotation?
1. What brand of compressor do you like? Bitzer ,Copeland or other ?
2. What is temperature of cold room?
3. How much power of compressor do you need?
4. What is your voltage and Hertz?
Q2. Could your factory accept customized ?
We can do customized dimension according to customers'requirements. We have access to all the leading Cold Room refrigerators brands and can offer independent advice, and recommend right equipment to meet your business requirements.
Q3. How long delivery time ?
1. 220V-380V, 50Hz power need 15-25 days
2. If you voltage special in China, we need costomized refrigeration equipment, need 45 days.