Product | cold rolled steel coil |
Thickness | 0.3mm-20mm |
Width | 1000mm,1250mm, 1500mm |
Length | Customer's Requirement |
Technology | Cold rolled |
Application | belt saws, buzz saws, metal band saws, chain saw guides, music box sound pegs,cutters,diaphragm springs etc. |
Coil Weight | 3-10MT |
HS Code | 76061199 |
Grade | Yield Strength RcL Mpa | Tensile Strength Rm Mpa | Elongation A80mm % | Plastic Strain Ratio r90 | Strain Hardening Index n90 |
DC01 | 140~280 | 270~410 | ≥28 | ||
DC02 | 140~240 | 270~370 | ≥34 | ≥1.4 | |
DC03 | 120~210 | 270~350 | ≥38 | ≥1.8 | ≥0.18 |
DC04 | 120~180 | 270~330 | ≥40 | ≥2.0 | ≥0.20 |
Grade | Yield Strength Relb)MPa | Tensile Strength RmMPa | Plastic Strain Ratio r90e),d) | Strain Hardening Index n90d) |
SPCC | 130~300 | 270~410 | ||
SPCD | 120~240 | 270~370 | ≥1.3 | |
SPCE | 120~210 | 270~350 | ≥1.8 | ≥0.18 |
Grade, Standard, Application | Grade | Implementation Standard | Application |
General Use | DC01(SPCC、ST12) | GB/T 5213-2008 | Refrigerator and other home appliance shells, oil drums, steel furniture and other general forming processing |
Stamping Grade | DC03(SPCD、ST13) | Steel for stamping and forming of automobiles, home appliances and buildings | |
Deep-drawing Grade | DC04(SPCE、ST14) | Steel for deep drawing forming of automobile headlights, fuel tanks, car doors, windows, etc. | |
Special Deep-drawing Grade | DC05(SPCF、ST15) | Complex vehicle floor, oil pan | |
Super Deep-drawing Grade | DC06 (SPCG、ST16) | Auto door inner panel, complex bottom plate, oil pan, wheel cover, front and rear fenders, etc. | |
Enamel Steel | DC01 | Bathtub, enamel products | |
High Strength Steel | CR140~300BH | GB/T 20564-2006 | Car roof, floor, mudguard, door, etc. |
CR260/450~420/780DP | |||
CR180~260IF |
Grade | C | Mn | P | S | Alta | Tib |
DC01、SPCC | ≤0.12 | ≤0.60 | ≤0.045 | ≤0.045 | ≥0.020 | |
DC02、SPCD | ≤0.10 | ≤0.45 | ≤0.035 | ≤0.035 | ≥0.020 | |
DC03、SPCE | ≤0.08 | ≤0.40 | ≤0.030 | ≤0.030 | ≥0.020 | |
DC04、SPCF | ≤0.06 | ≤0.35 | ≤0.025 | ≤0.025 | ≥0.015 |