Laser Power Meter
I. Outline
Laser Power Meter using the amount of heat absorption measurement principle, thermal sensor measure the scope is very wide in spectral width and power, very high spatial uniformity, Without spot size, spot location or spot uneven impact. Can measure continuous wave laser output power, pulse repetition rate can also measure the average laser output power.
II. Technical parameters
1 Name: Laser Power Meter
2. Model YL-S-3
3 Range: 0-200W
4 Display: LED display
5 Minimum Resolution: 0.1W
6 Photosensitive area: 28mm
7 Spectral range: 1-11um
8 Calibration Wavelength: 10.6um
9 Uncertainty: 5% ± 1
10 Response time: 1 ~ 3S
11 Cooling: Water-cooled
12 Applications: CO2 laser
13 Power Requirements: AC 220V ± 10%, 50Hz
III. Use
1 Connected the signal line and power cord, turn on the power switch on the panel.
2 According to the power of the test object, through the switch to choose the appropriate range.
3 Let CO2 laser beam to align the center of sensor head and start power measurements.
4 Please turn off the power after test completed. Long term storage, please unplug the power cord and signal cable.
IV. Notes
1. Gently to prevent the probe due to shock loss or damage to components.
2. Any questions please return factory for maintenance.
Laser Tube holder for your choice;
For more detail information of our laser power supply, please contact us freely,
we will try our best to help you.