Foam Type: IXPE FOAM / IXLPE FOAM | ||||||||
Property | Standard | Unit | Value | |||||
Density | - | Kg/m³ | 66.70 | |||||
Tensile Strength | Transverse | ISO-1798 | MPa | 0.54~0.55 | ||||
Longitudinal | 0.64~0.65 | |||||||
Elongation | Transverse | ISO-1798 | % | 203.70~232.70 | ||||
Longitudinal | 253.90~283.40 | |||||||
Tearing Strength | Transverse | ISO-8067 | Kn/m | 3.47~3.68 | ||||
Longitudinal | 4.28~4.34 | |||||||
Operating Temperature Range | Internal | °C | (-40,+80) | |||||
Water Absorption % Volume (Maximum) | Internal | % | 0.30 | |||||
Thermal Conductivity | JIS A1412-2 | W/mK | 0.065 | |||||
Shore - C | ASTM D2240 | °C | 40 | |||||
Flammability | FMVSS302 | mm/min | - |
Single foaming structure can reduce the loss of heat between air convection, suitable for making heat preservation pipes and boards.
Closed-cell foam, non-water-absorbing, moisture-proof.
Soft texture and good resilience enable foam to have a shock absorption effect and play a protective role.Semi-hard quality foams have good rebound capabilities after strong impact.
Good sound and noise absorption capability.
Conductivity of this material is 0.032 w / mk at an average° C. As this product has high heat-releasing ratio, it can get the same heat-preservation effect at less half thickness of other insulating product under the same condition, saving not only space but also cost.
Roof reflective heat insulation
1.Material:XPE foam or IXPE foam faced with aluminum foil both side.(aluminum foil-xpe/ixpe-aluminum foil)
2.Density:25-33.3kg/m3
3.Thickness:4mm,6mm,7mm,8mm,10mm.
4.Wide:1350mm/1500mm
5.Fire resistant: yes
6.Certificate:ASTM1530
Underlay
1.Material:IXPE foam
2.Density:33.3kg/m3 ,66.7kg/m3, 100 kg/m3.
3.Thickness:1mm,2mm,3mm.
Floating floor sound insulation
1.Material:IXPE foam
2.Density:50kg/m3 ,66.7kg/m3
3.Thickness:5mm.
CYG TEFA CO.,LTD is an affiliate of the listed company WOER (Shenzhen: 002130). Established in December 2002, CYG is committed to the research and development, production and sales of cross-linked PE and PP foam materials, and is a national high-tech enterprise. There are two bases in Shenzhen and Huzhou, with more than ten various production lines with an annual production capacity of more than 6,000 tons; The main products are: ESD, XPE, IXPE, IXPP and various composite materials based on XPE, IXPE, IXPP ; Widely used in electronic communications, automotive, air-conditioning refrigeration, construction, sports protective gear, medical supplies and other industries, products are sold to many regions around the world.