No | Item | Data |
1 | Cover Rubber grade | 8MPA,10MPA,12MPA,15MPA 18MPA,20MPA,24MPA,26MPA |
2 | Belt width (mm) | 400,500,600.650,700,900,800,1000,1200 1400,1500,1600,1800,2000,2200,2500 |
3 | Tensile strength | EP200/2,EP315/2,EP315/3,EP400/3,EP500/3,EP600/3,EP400/4,EP500/4,EP630/4,EP800/4,EP1000/4,EP500/5,EP600/5,EP750/5,EP1000/5,EP1250/5 EP600/6,EP1200/6 |
4 | Top+Bottom thickness | 3+1.5, 4+2, 4+1.5, 4+3, 5+1.5, 6+2, 7+2, 8+2 |
5 | Belt thickness | 4mm-25mm |
6 | Belt length | 50m, 100m, 200m, 250m, 300m |
7 | Belt edge type | moulded(rubbered) edge or cut edge |
8 | Surface | smooth, chevron, rough top |
DIN-22102 | ||||||||||||
Grade | Tensile strength ≥Mpa | Elongation at break ≥% | Abrasion ≤mm2 | Adhensive between fabrics≥N/mm | Adhensive between cover and fabric ≥N/mm | |||||||
cover thick 0.8-1.5mm | cover thick>1.5mm | |||||||||||
Z | 15 | 350 | 250 | 5 | 3.5 | 4.5 | ||||||
W | 18 | 400 | 90 | |||||||||
Y | 20 | 400 | 150 | |||||||||
X | 25 | 450 | 120 | |||||||||
RMA | ||||||||||||
Grade | Tensile strength ≥Mpa | Elongation at break ≥% | Abrasion ≤mm2 | Adhensive between fabrics≥N/mm | Adhensive between cover and fabric ≥N/mm | |||||||
cover thick 0.8-1.5mm | cover thick>1.5mm | |||||||||||
RMA-I | 17 | 400 | -- | 4 | 3 | 4.4 | ||||||
RMA-II | 14 | 400 | -- | |||||||||
