CW heavy duty universal lathe CW61160B
CW61100B CW61125B CW61160B parallel lathes are suitable for turning or cast iron and steel workpieces,turning of non-ferrous metal parts of big or medium sizes.It can do external cylindrical surface turning,inner hole and end face turning.It can also turn various internal and external metric,inch,module and diametrical pitch threads,the top slide can be used independently for turning of short taper.
These lathes are of high power,high rigidity and wide rotating speed range,so it can be used for high speed and strong force turning.
1.CW Series Lathe Machine are universal lathe suitable for high-speed steel and carbide cutting tools for different materials steel shaft parts, cylindrical parts and disk-shaped, for turning cylindrical, face, grooving, cutting, boring, boring the cone, threading and other processes
2. CW Series Lathe Machine are medium frequency hardened, and has good hardness and precision;
3. Triple support of CW Series Lathe Machine ensures spindle rigidity and supporting capacity;
4. CW Series Lathe Machine have the large speed range, and the motion is smooth and the low temperature-rising;
5. CW Series Lathe Machine has the nice and dignified appearance;
Product DescriptionProduct |
ITEM |
UNIT |
CW61100B |
CW61125B |
CW61160B |
|
CAPACITIES |
Swing over bed |
mm |
1000 |
1250 |
1640 |
Swing over carriage |
mm |
615 |
865 |
1250 |
|
Max.length of workpiece |
mm |
1500 2000 3000 4000 5000 6000 8000 10000 12000 |
|||
Max.turning length |
mm |
1300 1800 2800 3800 4800 5800 7800 9800 11800 |
|||
Pan of guideway |
mm |
755 |
|||
SPINDLE |
Spindle nose |
mm |
A2-15(8×M22) |
||
Spindle bore |
mm |
130 |
|||
Taper hole of spindle |
|
1:20/140 |
|||
Range of spindle speeds |
r/min |
forward:3.15~315 ; reverse:3.5~291 |
|||
No.of spindle speeds |
|
forward:21; reverse:12 |
|||
FEED |
No.of Longitudinal and cross |
|
56/56 |
||
Feed per revolution |
mm |
Longitudinal:0.1~12;cross:0.05~6;top slide:0.025~3 |
|||
No. and range of metric thread |
|
44;1~120mm |
|||
No. and range of inch thread |
|
31;28~1/4 |
|||
No. and range of module thread |
|
45;0.5~60mm |
|||
No. and range of dia. thread |
|
38;1/2~56DP |
|||
ttTURRET |
Distance of centerline and tool resting plane |
mm |
48 |
||
Tool post swing range |
° |
±90° |
|||
Max.travel of cross slide |
mm |
520(20″) |
|||
Max.travel of top slide |
mm |
300 |
|||
Section of tool shank |
mm |
45(260x260) |
|||
Rapid travel speeds |
mm/min |
Longitudinal:3740;cross:1870;Little slide:935 |
|||
TAILSTOCK |
Dia. of tailstock |
mm |
160(6″) |
||
Travel of tailstock quill |
mm |
300(12″) |
|||
Taper hole of tailstock quill |
|
morse 6 |
|||
OTHERS |
Main motor power |
kw |
22 |
||
Length |
mm |
4600 5100 6100 7100 8100 9100 11100 13100 15100 |
|||
Width |
mm |
2150 |
|||
Height |
mm |
1700 1825 2150 |
|||
Max.weight of workpiece |
kg |
6000 |
Standard Configuration :
1. The overall bed, the width of the guide 755, the tail of the sleeve cone hole: Morse6
2. 1.5 meters below the specifications without the center frame and with a knife
Feed box
Also called feeding box, feed movement are installed in the feed box shift gear, adjust its shift gear, can get the required feeding or pitch, through light poles or screw would transmit the motion to head for cutting.
Slip board box
Lathe feed movement control box, in which the light poles and the tool carrier of screw rotation movement into linear motion mechanism, through light bar transmission to realize tool post transverse and longitudinal feed movement of the feed movement and fast moving, and through the screw drive tool post for vertical linear motion, so that the thread cutting.
Knife rack
There are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
Tengdong Machine Tool Co., Ltd. is a set of lathes, milling machines, drilling machines, planers, presses and other machine tool equipment consisting mainly of modern production group production enterprises. Company under the three production bases, an import and export foreign trade companies |
lathe machine lathe machine lathe machine lathe machine lathe machine lathe machine lathe machine lathe mache machine lathe machine lathe machine lathe machine lathe machine lathe machine lathe machine
Q1: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
Q2.What is your minimum order quantity and warranty?
A:MOQ is one set, and warranty is one year.
Q3.How soon can I receive the goods?
A:Most of our products are in stock, and we will arrange shipment around a week after payment is completed.
Q4.Can I trust you?
A:Sure, we’re Alibaba Gold Suppliers , Alibaba Assessed Supplier , Alibaba Trade Assurance Supplier.
Q5.What is the package? Is it suitable for shipment?
A:Machine is by waterproof cloth to covered.And be packed by standard exported wooden case with steel foot.. It is very much strong for oversea transportation.
Q6.Are you manufacturer?
A: Yes, we are a manufacturer of machine tools,we have our own technical team, and about 100,000 sq.m workshop, welcome to visit us!