Product Introduction
LD series DC servo motor driver is a high-performance DC motor driver which has been introduced by senior experts after more than ten years of application experience in the robot industry, combined with leading motor control and current accurate detection technology. The powerful PID adjustment technology can perfectly control the motor's smooth forward and reverse rotation, commutation and braking. The output current can be adjusted in real time to prevent overcurrent. The motor speed and rotation position can be accurately controlled. The motor has a short response time and low recoil. We can provide 5A-200A high current, wide voltage input 12v-96v and other serialized products. This product is widely used in mobile cars, service robots, wearable exoskeleton robots and other products.
Product Parameters
Model | LDS65B96G |
---|---|
Rated Current | 65Arms±1% |
Maximum Current | 130Arms±1% |
Maximum Overload Time | 6S |
Overload Recovery Time | 90S (without external heat dissipation) |
Limit Power Supply Range | 18VDC~96VDC |
Temperature Rise | Rated current operation 30min≤40K (refer to cooling mode) |
Drive Frequency | 6 ~ 21KHz±0.1KHz |
Cooling Method | The ventilation condition is good, and the installation surface needs to have some heat dissipation effect, such as iron plate, steel plate, etc. |
Rated Insulation Withstand Voltage | The leakage current of input and output to chassis DC 1000V is less than 3mA, |
Insulation Resistance of the Whole Machine | When the temperature is 40° and the humidity is 95%, ≥1M (no dew on the board) |
Mean Time Between Failures (MTBF) | ≥5000 hours |
Power Control Method | Vector control |
Protection Level | IP32 |
Advantages
Communication Interface
2. CAN Communication