Model | ELECNC1325 pneumatic 4 heads machine center |
Working voltage | AC380V/50HZ/3PH (highly flexible shielded cable) |
X, Y , Z axis travel | 1300*2800*200mm |
Machine body construction | New large square tube seamless welded bed, milled on five sides, with wider square tubes and additional reinforced square tubes to improve bed strength and table strength |
Gantry construction | Heavy-duty reinforced beam structure to improve the stability of the beam (high precision, large load capacity), the column adopts widened square tubes with reinforcing bars welded to improve the stability of the column strength, heavy-duty head structure |
Table structure | 7 partition vacuum adsorption table, table top using pre-built parts, more convenient to replace the table top, easy to replace the liner, no more scraping glue coating, improve the precision of the table top, more prevent string gas, air leakage, improve the adsorption effect. |
Control system | Taiwan LNC control system (easy to learn interface operation and high stability) |
Supported file formats | *.g; *.nc; *.ug; *.demo; *.iso; *.eng; *.cut |
Positioning cylinder | Y4X2 |
Push device | Push and secondary dust collector (for easier unloading and increased productivity) |
Spindle type | 2 pieces 6KW air cooling spindle, 2 pieces 4.5kw air cooling spindle |
Inverter type | 2 pieces 7.5kw (Zero second tool change inverter) |
Driving system | 1.5kw servo motor and driver, Japan Shimpo reducer |
Transmission | X,Y axis adopts Taiwan 2-mode helical rack gear, Z axis adopts Taiwan TBI ball screw, high precision and more durable Z-axis adopts one-piece enlarged bearing housing, coupling adopts diaphragm type coupling, higher stability |
Linear guide | Taiwan square linear guide,X, Y and Z axis #25 |
Vacuum pump | 7.5kw vacuum pump, has butterfly valve protection it, solenoid valve for fast vacuum break |
Dust collector | 5.5kw double bag dust collector with motor protection to prevent overcurrent damage to the vacuum pump and dust collector |
Pneumatic protection | Air pressure detection system for the whole machine, if there is insufficient air pressure when the machine is working, the system will immediately generate an alarm and stop working to protect the spindle and other important parts from being damaged. |
Working voltage protection | Equipped with a voltage phase sequence protector to prevent damage caused by too low or too high voltage and to prevent machine failure due to wrong wiring |
Lubrication system | Automatic lubrication, microcomputer gear pump automatic oiling system, higher oiling pressure, volumetric oil discharge to ensure uniform oiling, maintenance-free |
Tool Calibration | Movable automatic tool setter |
Cables | Germany Igus cables with CE, cUL certificate |