China voice mux 60 port FXS/FXO over fiber, fiber phone line converter MUX
60 channel telephone optical multiplexer
Specification
- provide 60 way FXS/FXO port phone,4channel Ethernet and 4E1.
- Support OEM&ODM
- The device is widely used in: places such as telephone bars, middle and small scale companies, expressways and some temporary construction sites which demand quick solutions to the need of telephone and data operation, and the “Villagevillage Connection” telephone accessing project which is now in progress.
Product Overview
The phone offers 60-way telephone Optical 1 to 4 E1 interfaces, 4 physically isolated Fast Ethernet interface (independent bandwidth per line speed 100M). 4 Fast Ethernet ports can connect four different businesses, non-interfering.
Features
- Based on proprietary integrated circuit;
- E1 interface complies with G.703, all-digital clock recovery and smooth phase-locked technology;
- support FXO voice port FXS ports and ports, EM2 / 4 audio interface, magneto telephone interface; FXO port and PBX docking port and the user is connected to FXS telephone;
- Voice FXO / FXS access, support caller ID function and reverse polarity billing functions;
- Support Telephone Number mutual function of each site;
- providing four expansion interface, can be extended from 1 to 4 asynchronous data, such as RS232 / RS485 / RS422 / Manchester codes;or 1 to 8-way switch, 1 to 4-way voice, or two / four-wire audio, etc.;
- Ethernet 10 / 100M, full / half duplex fully adaptive, independent bandwidth per line speed 100M, the total bandwidth can be bidirectional 4 * 100M;
- Each Ethernet ports support Auto-MDIX (cross / straight cable adaptation);
- unrepeated transmission distance of up to 2 to 100 km;
- multiple power mode options: AC220V, DC-48V / DC24V, etc;
- telephone interface with lightning protection, lightning reached 17626.5 (IEC61000-4-5) Short circuit current wave 8 / 20μs,the peak output voltage 6KV open standards;
| fiber port | multi mode | 50/125um, 62.5/125um |
|
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm |
||
| Transmitting power: -12dBm (Min) ~-9dBm (Max) | ||
|
Receiver sensitivity: -28dBm (Min) |
||
|
Link budget: 16dBm |
||
|
Single-mode |
8/125um, 9/125um |
|
| Maximum transmission distance: 40Km | ||
|
Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) |
||
|
Wave Length: 1310nm |
||
| Transmitting power: -9dBm (Min) ~-8dBm (Max) | ||
|
Receiver sensitivity: -27dBm (Min) |
||
| Link budget: 18dBm | ||
| E1 interface | Standard: | comply with protocol G.703 |
| Rate: | n*64Kbps±50ppm | |
| Code: | HDB3 | |
| E1 Impedance: | 75Ω (unbalance), 120Ω (balance); | |
| Jitter tolerance: | In accord with protocol G.742 and G.823 | |
|
AllowedAttenuation: |
0~6dBm | |
| Ethernet(100/100M) |
Interface rate: | 10/100 Mbps, half/full duplex auto-negotiation |
|
Interface Standard: |
IEEE 802.3, IEEE 802.1Q (VLAN) | |
| MACAddressCapability: | 4096 | |
| Connector: | RJ45, support Auto-MDIX | |
| Phone | FXS port | Ring voltage: 75V |
|
Ring frequency: 25HZ |
||
| Two-line Impedance: 600 Ohm (pick up) | ||
|
Return loss: 40 dB |
||
| FXO port | Ring detect voltage: 35V | |
| Ring detection frequency: 17HZ-60HZ | ||
| Two-line Impedance: 600 Ohm (pick up) | ||
| Return loss: 40 dB | ||
| EM 2/4 Line | AD: 0dB | |
| DA: -3.5dB | ||
| Two/Four-line Impedance: 600 Ohm | ||
| Return loss: 20 dB | ||
| power | Power supply: | AC180V ~ 260V;DC –48V;DC +24V |
| Power consumption: | ≤10W | |
| Dimension | Product Size: | 485X200X45mm(WXDXH)19 1U |
| Simple packaging: | 522X198X82mm(WXDXH) | |
|
Piece Weight : |
2.4KG | |
| Workingenvironment | temperature: | -10°C ~ 50°C |
| Humidity: | 5%~95 % (no condensation) | |
| Storagetemperature: | -40°C ~ 80°C | |
| Storage Humidity: | 5%~95 % (no condensation) |
Networking Application
"Design and manufacture the most reliable and efficient fiber optic communications products in the industry."
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier