China's Shandong most brick production line with used clay brick extruder mac

used clay brick extruder mac

1.Spare parts are free for you;

2.Larger service time; 

3.Using German technology;

4.Save cost,save labour

5.We are direct manufacturers of brick making machine.

China's Shandong most brick production line with used clay brick extruder mac

We are the manufacture factory for brick making production line for ten years.
1,Automatic Handling System
2,Vacuum Extruder
3,Crusher
4,Mixer & Transportation Equipment

1.mouthpiece  2.distance-piece  3.manometer  4.barrel  5.machine tool  6.vacuum gauge  7.vacuum chamber

 8.mixing box  9. speed down box 10.clutch  11.clutch  12.speed down box  13.electric motor speed down

This machine by the superior mixing extruder and lower extruder, two levels of a total of four motor drive, through the gear box reducer are respectively driven stirring shaft, a mud pressing shaft and a reamer spindle, in mixing extruding machine at the end of a vacuum chamber and vacuum pump pumping port is connected. Work, add enough water ageing raw materials from the upper into the mixing part, the blade stirring stirring to move forward, stirring after the section of the blade spiral extrusion, forced stirring the raw material through a comb plate is a chopping knife cut into fine mud into the vacuum chamber, mud in the air through the vacuum chamber is pumped out, raw material became dense and into body, is spiral reamer launched through the nose, mouth machine squeeze into the mud.

1.Vacuum extruder for brick machine  applies to clay,shale,coal gangue,fly ash,split brick etc,to produce all kinds of hollow blocks and solid bricks and color paving bricks,only by changing different mouth-piece.

2.  Extrusion pressure: 3.0MPa, it can make both solid and hollow brick and big holes.

3. Main axle techniques: Quenching, tempering, the suppression experiment, so strengthen main axle's steel and toughness.

4.  Reamer techniques : adopts the high chromium casting , passed the aging, quenching and tempering process

5. Techniques of squeeze out cylinder and vacuum chamber: the whole processing, quenching processing, these can increase the toughness and extent complete machine life.

6. The steel material of shafts and gears adopt high quality carbon steel and alloy steel, the key parts are quenched and tempered treated so as to extend fly ash bricks making machine life.

7.For double shaft mixer blades, we choose 45 Carbon steel as material.

8.Differ types of moulds insure that you can produce different types of brick( Solid and hollow brick)

Note:if your brick size is different , then the capacity will differ .We would send different brick capacity list and different brick machine price list to you once we get your mail to us.

Raw materials and Brick sample photos

The extruder is the main parts of brick making plant and our extruder is suitable for producing all kinds of cell brick with material like clay, gangue, shale, fly ash .

The following is part of brick sample which auto brick making machine can produce .

Note: We can provide other different brick mould with different mould sizes according to your requirements

The whole set of machinery of clay brick production line

Clay brick production line

Note:The above production line is based on clay,shale,coal gangue,fly ash or with small stones .And this is full automatic,if you want to save money ,you can`t use robotic and setting machine,you can manual setting,but waste time and expend is very high.the automatic is suitable for tunnel kiln,and manual is Hoffman kiln.

Major equipments in clay brick production line.

1.Box Feeder

This machine is used for constant feeding  of raw material before grinding;

2.Crusher

This machine is used for crushing the raw material.

3.Mixer

This machine is used for mixing the raw material and the water.

4.Brick making machine

It is used for making the green brick strips.

5.Cutter

It is used for cutting the adobe strip into the green brick according to different size requirement

Our company has all kinds of production line configuration, different configuration can meet the needs of different raw material output.

Save money for you, rational use of resources, to create the greatest value. Definitely your best choice.

I am here waiting for you.

Our website: www.chinacosmec.cn

Contact information  In the picture:

How to visit us or check brick machine  quality

If you want to visit our Chinese factory, please note our city name, Weifang city.

Our air port name is : Qingdao orJinan International air port.

Train station name is: Qingdao,Jinan or Weifang train station