The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.
Characteristics
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Crush resistance and flexibility
PSP enhancing moisture-proof
Two parallel steel wires ensure tensile strength
Small diameter, light weight and friendly installation
Long delivery length
Standards
GYXTW cable complies with Standard YD/T 769-2003.
Optical Characteristics
|
| G.652 | G.655 | 50/125μm | 62.5/125μm |
Attenuation | @850nm |
|
| ≤3.0 dB/km | ≤3.0 dB/km |
@1300nm |
|
| ≤1.0 dB/km | ≤1.0 dB/km | |
@1310nm | ≤0.36 dB/km | ≤0.40 B/km |
|
| |
@1550nm | ≤0.22 dB/km | ≤ |
|
| |
Bandwidth (Class A) | @850nm |
|
| ≥500 MHz·km | ≥200 MHz·km |
@1300nm |
|
| ≥1000 MHz·km | ≥600 MHz·km | |
Numerical Aperture |
|
| 0.200±0.015NA | 0.275±0.015NA | |
Cable Cut-off Wavelength λcc | ≤1260nm | ≤1480nm |
|
|
Technical Parameters
Optical cable model | Fiber number | Cable Diameter | cable weight kg/km | Maximum Tension(N) | Maximum Crush Resistance(N/per100cm) | Minimum Bending Radius |
GYXTW-2~12 | 2~12 | 8.0 mm | 75 | 600/1500 | 1000/3000 | 10D/20D |
Storage/Operating Temperature : -40℃ to + 70℃
OEM print, OEM pacakge.
DDP delivery
Test machine.