Number | Project | Company | Specifications and parameters |
1 | Product model | RDQH-60/200 | |
2 | Power AC | 380V (phase sequence automatic conversion), 50Hz | |
3 | Rated maximum gas storage pressure (20 ℃) | MPa | ≤4 |
4 | Device vacuum maintenance | When the pressure is maintained at 133 Pa for 24 hours, the vacuum value rises < 400 Pa | |
5 | SF6 compressor | Maneurop | |
6 | Vacuum pump | Direct coupled pump | |
7 | Recovery device adapts to inlet initial pressure (20 ℃) | MPa | 0~1.0 |
8 | Final recovery pressure of electrical equipment (20 ℃) | kPa | ≤50 |
9 | Gas oil control after recovery | μg/g | Domestic oil content < 10 |
10 | Annual air leakage rate of unit | % | < 1 |
11 | Continuous trouble free operation time of the device | h | ≥1000 |
12 | Accumulated trouble free operation time | h | ≥5000 |
13 | noise level | dB | The whole machine is less than 75. |
14 | Theoretical storage capacity | kg | 200 |
15 | Refrigeration liquefaction compressor | Maneurop | |
16 | Gas moisture after recovery | PPM/V | 60 |
17 | Gas oil after recovery | PPM/V | 10 |
18 | Dry filtration method | Vacuum heating activation regeneration | |
19 | Initial pressure of inflation | Pa | ≤ 133 |
20 | Inflation final pressure | MPa | 0.8 |
21 | Gasification mode | Automatic temperature control of electric heating | |
22 | Vehicle type | Hand push Mobile | |
23 | Cooling mode | Air cooling |
Name | project | Company | Specifications and parameters |
SF6 compressor Maneurop | Theoretical exhaust volume | m³/h | 19 |
Maximum discharge pressure | MPa | 2.5 | |
Allowable discharge pressure | MPa | 1.96 | |
Minimum allowable suction pressure | KPa | 53 | |
Maximum allowable suction pressure | MPa | 0.3 | |
Maximum exhaust temperature | ℃ | 130 | |
Lubricating oil | HD25 refrigerant oil | ||
power | kW | 3.7 | |
Power Supply | 380V, 50Hz | ||
Direct coupled pump | Pumping rate | m³/h | 60 |
Extreme vacuum | Pa | ≤ 5*10-2 | |
Lubricating oil | Vacuum pump oil | ||
power | kW | 2.2 | |
Power Supply | 380V, 50Hz | ||
Standard cooling capacity | W | 6100 | |
Cryogen | R22 | ||
Maximum refrigerant charge | kg | 2.0 | |
Lubricating oil | HD25 refrigerant oil | ||
power | kW | 3.8 | |
Power Supply | 380V, 50Hz | ||
Container class | Two category | ||
Design pressure | MPa | 4.0 | |
Design temperature | m³/h | 50 | |
Volume of storage container | L | 200 | |
Storage container storage capacity | kg | 200 |