China insert ball bearing UC UK SA SB SER NA 204 205
Model | UC UK SA SB SER NA Series Insert Ball Bearings |
Brand | FSZ or OEM&ODM |
Type | Insert Ball Bearings |
Material | Chrome steel,stainless steel |
Cage Material | Steel Cage/Copper Cage/Nylon Cage |
Vibration | Z1V1 Z2V2 Z3V3 |
Precison rating | P0 P2 P5 P6 |
Grease | No.2 lithium Grease |
Gurantee | 1 year |
Certification | ISO9001:2008 |
Place of Orgin | Nanan,Fujian,China |
MOQ | 100 pcs |
Service | Prompt delivery; OEM; Good after-sales service offered. |
Payment terms | 30% Paid in advance,balance before the delivery |
Port | XIAMEN,Ningbo,or Your Requirement |
Details | Fast Delivery,Competitive Price,and High Quality |
The performance and reliablility of rolling bearings are greatly affected by the material which the bearing components are made from. FSZ bearing rings and balls are made of high quality GCr15 vacuum-degassed bearing steel. Chemical composition of GCr15 bearing steel is basically equivalent to some representative bearing steel as the chart shown below:
The bearings usually operate below the temperature of 120℃(the measuring temperature of the outer ring is 100℃). Grease life reduction has to be taken into account when the bearings continue to operate at temperature above 70℃. The lowest operating temperature should not be lower than -10℃.
For higher or lower temperature application, please consult us for further information.
Under normal operating condition, the grease should conform to the life of the bearings. Relubricatable type bearing untis must be periodically greased to assure long life.
The greasing interval is dependent on the bearing running speed, operating temperatures and ambient conditions.
The follwing table shows the standard relubrication period.
The ball bearing unit is provided with two hexagonal setscrews 120° apart on one side of the inner ring. Under normal operating conditions, the inner ring is mounted on shaft by means of a loose fit to ensure convenience of installation.
When the ball bearing is used at a high speed or under a heavy load, the inner ring of the ball bearing should be mounted to the shaft by means of a tight fit.
FUJIAN FOS BEARING CO.,LTD was established on Oct. 24, 2005, with registered capital of RMB 10 million. "FSZ" is our registered trademark.
Our company is specialized in producing all kinds of bearing units, while also engaged in stainless steel bearing units, zinc alloy bearing units, pressed steel bearing units, deep groove ball bearings, taper roller bearings, spherical roller bearings, ceramic ball bearings and spherical plain bearings. 80% of our products are exported to Europe (mostly Germany & UK), North America, Southeast Asia, Middle East, Africa and Taiwan. And 20% to domestic markets.
The spherical radial ball bearings have UC/UK/UCX/HC/SA/SB/CSB/CSA/CS series, etc. The bearing units have P/F/FL/T/FC/PA/PH/PW/FA/FB/PG/PX/FX/C series, etc. All of the above series have complete moulds, and the materials for bearing units have grey cast iron and ductile iron. The sizes range from 201 to 218 and 305 to 328.