Appearance of PTFE dispersion powder
White PTFE fine powder, no impurities
Application fields
PVDF (dispersion) fine powder, could be used to extrude tube, rod, tensile, film and seal tape etc.
TDS
PTFE dispersion powder fluoroplastic PTFE fine powder HS code 39046900
Characteristic
PTFE fine resin | |||
Main Technical Properties | |||
FR-D01 | FR-D02 | FR-D03 | |
Appearance | White loose powder | White loose powder | White loose powder |
Tensile strength, Mpa | 28 | 20 | 32 |
Elongation at break, %≥ | 350 | 350 | 350 |
Bulk density, g/L | 375-575 | 375-575 | 375-575 |
Average size, d50 µ m | 400-900 | 400-900 | 550-750 |
Moisture, % ≤ | 0.03 | 0.03 | 0.03 |
Extrusion pressure(RR100:1)Mpa | 5.5+13.9 | 5.5-13.9 | 14.5-40.5(RR400:1) |
Standard specific gravity | 2.14-2.19 | 2.17-2.20 | 2.14-2.19 |
Thermal Instability Index, ≤ | 30 | 30 | 30 |
Extrusin pressure | Continuous, even,smooth | Continuous, even,smooth | Continuous, even,smooth |
Product characters: |
1.Has high tensile strength,can make wide seal tape. 2.To make 4-12mm white extruded tube. 3.To make 16mm extruded rod. |
1. Make color wide seal tape, color is unform and no spot. 2. Make various extruded tube, color is uniform. |
Make various extruded tube, use repid cooling process to improve tube transparency |
Application | Make extruded tube,rod,tensile,film,seal tape, etc | .Make extruded tube, rod, tensile,film, seal tape, etc. | Make extruded tube,rod, tensile,film, seal tape,etc. |
1. PTFE Fine Powder
2. PTFE Dispersion Powder
3. PTFE Suspension Molding Powder
4.PTFE medium-size particle resin
5. PTFE Free Flow (Pelletized) Resin
6. Modified PTFE fine powder for PTFE membrane
7. PTFE Dispersion-liquid
PTFE Dispersion Powder-macaroni pipe
3
PTFE Suspension Molding Powder
FR-S30 | FR-S30-S | |
Apperaance | White powder, no impurities | White powder, no impurities |
Tensile strength(Mpa,≥) | 37.5 | 35.0 |
Elogation at break (%,≥) | 320 | 320 |
Bulk Density (g/L) | 300-500 | 300-50 |
Average particle size,d50 (um) | 30±5 | 30±5 |
S.S.G. | 2.13-2.19 | 2.13-2.19 |
Melting point(℃) | 327±5 | 327±5 |
Thermal instability index(℃,≤) | 30 | 30 |
Electric strength (MV/m,≥) | 3 | 3 |
Processing | Molding | Molding |
Application | Film, Rod, tube, sheet, sealing material | Film, Rod, tube, sheet, sealing material |
Packing | Sealed in PVC bags, packed in paper barrel | Sealed in PVC bags, packed in paper barrel |
PTFE mediun-size particle resin
FR-S90 | |
Apperance | White powder, no impurities |
Tensile strenght(Mpa,≥) | 25.5 |
Elongation at Break(%,≥) | 250 |
Bulk Density (g/L) | 500±100 |
Average particle size,d50 (um) | 60-100 |
Moisture(%,≤) | 0.03 |
Melting point(℃) | 327±5 |
Standard relative density | 2.13-2.18 |
Thermal Instability Index(≤) | 50 |
Electric intensity(MV/m,≥) | 60 |
Characters | The partial size is uniform, suitable for skived molding big plate and turning film.S90 can replace some products of Molding powder, and has good brightness in apperance |
Application | Make tube,rod,plate and seal material, etc. |
PTFE free flow (Pelletized) resin
FR-F01 | FR-F02 | FR-F03 | |
Apperance | White powder, no impurities | White powder, no impurities | White powder, no impurities |
Tensile strenght(Mpa,≥) | 22.5 | 22.5 | 22.5 |
Elongation at Break(%,≥) | 275 | 275 | 275 |
Bulk Density (g/L) | 750±150 | 750±150 | 750±150 |
Average particle size,d50 (um) | 200-400 | 401-600 | 601-900 |
Moisture(%,≤) | 0.02 | 0.02 | 0.02 |
Melting point(℃) | 375±5 | 375±5 | 375±5 |
S.S.G. | 2.13-2.19 | 2.13-2.19 | 2.13-2.19 |
Thermal Instability Index(≤) | 30 | 30 | 30 |
Characters | The partial size is small and fluidity is good. It can be added to various small moulds. | Can make mult-angle automatic molding products. | The partial size is round and has good fluidity.It can mix with other resin. |
Application | Make molding rod,tub,plate, suitable for automatic estrusion. | Make molding rod, tub,plate,suitable for automatic extrusion. | Make molding rod, tub, plate, can use as engineering plastic additive. |
Modified PTFE fine powder for PTFE membrane
|
FR-MD08 |
FR-MD18 |
FR-MD88 |
Appearance |
White powder |
White powder |
White powder |
Standard specific gravity |
2.16-2.17 |
2.15-2.16 |
<2.15 |
Tensile strength(Mpa ≥) |
26 |
26 |
26 |
Elongation at Break(% ≥) |
260 |
260 |
260 |
Average particle size( µ m) |
550±200 |
550±200 |
550±200 |
Application |
Suitable for Water treatment hollow fiber membrane and so on. |
Single, biaxially stretched film, extruded tube, elastic plate, clothing film, medical filter film, etc. |
Air filtration membrane and so on. |
PTFE Dispersion liquid
|
FR-E60A |
FR-E60D |
FR-E60F (PFOA free) |
Appearance |
White liquid |
White liquid |
White liquid |
PTFE content (%) |
60±2 |
60±2 |
60±2 |
Surfactant(%) |
4.0-7.0 |
4.0-7.0 |
4.0-7.0 |
PH |
8-10 |
8-10 |
8-10 |
Viscosity, x10-3Pa.s |
20-40 |
20-40 |
20-40 |
Characters |
1.Has good stability, suitable for any mixing process. 2.The content of surfactant helps to increase wetting and sticking. 3.Has high molecular weight and suitable for high temperature cooling process, to improve the polish the appearance. |
1. Has good wetting performance, especially for impregnation of glass fiber. 2.Has good dispersion performance, can mix with other dispersion |
1.Has good stability, suitable for any mixing process. 2.The content of surfactant helps to increase wetting and sticking. 3.Has high molecular weight and suitable for high temperature cooling process, to improve the polish the appearance. |
Application |
Impregnation of glass fiber and asbestos, anti-sticky coating. |
Impregnation of glass fiber and asbestos |
Impregnation of glass fiber and asbestos, anti-sticky coating. |
Package:
Packed with sealed PE bag outside, load in waterproof paper barrel. The net weight is 20/25+0.1kg per barrel, then stack on a pallet.(PTFE dispersion liquid:25/1335+0.1kg per barrel)
It should be stocked in clean, cool and dry warehouse, prevent from agglomeration and contamination.
Shipping:
Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
Normally, one week for samples and Within 3 weeks after payment for others.
Production orders can be arranged specially to meet customer’s urgent demands.
Jiangsu FreChem Co., Ltd
Starting from 2007, FreChem has now become one of the leading manufacturers of rubber compounds,
rubber additive and fluoropolymer in China.
Thanks to its Research & Development capabilities,
FreChem is able to provide highly qualified rubber compounds and fluoropolymer to global customers: fluoroelastomers (FKM), Fluorosilicones (FVMQ), HNBR compounds, Polyvinylidene Fluoride (PVDF), Polytetrafluoroethylene (PTFE), Fluorinated ethylene propylene (FEP), Polytetrafluoroethylene (PFA) and so on.
For years of experience and strong technology background,
FreChem expects to offer best solutions as well as customization in order to meet customers’ special needs.
The equipment and special know-how used in production control guarantee that our products respond to the customer requirements and provide high consistency standards.
Our vision is to become a better solution provider and we have confidence to provide our customer with competitive price as well as quality assurance.
To Yolanda Zhen