China Suspended Rolling Concrete Pipe Making Machine Factory
China Suspended Rolling Concrete Pipe Making Machine Factory
Description
Suspension roller type roller suspension concrete pipe making machine is a kind of perfect machine and equipment to produce reinforced concrete pipes and Pre-stressed concrete pipe. This machine is capable to make pipes with diameter from 300-2000mm and with length from2-4meters. We can design many kinds of the pipe joint, including flush joint, socket & spigot joint And all the concrete pipes are widely used in administrative drainage, agricultural field irrigation, road culvert and deep water well.
Parameters
Items | XG 200-600 | XG 800-1200 | XG 1000-1500 | XG 4M |
Diameter | 200-600mm | 800-1200mm | 1000-1500mm | 300-2000mm |
Length | 2000mm | 2000mm | 2000mm | 1000-4000mm |
power of motor | 15kw | 45kw | 90kw | 110kw |
Capacity | 10-15pc/h | 8-12pc/h | 6-10pc/h | 6-8 pc/h |
Labor demand without feeding machine | 4-5 | 4-5 | 4-5 | 4-5 |
labor demand with feeding machine | 3-4 | 3-4 | 3-4 | 3-4 |
Joint | Plain,socket and spigot,male and female | plain,socket and spigot ,male and female | plain,socket and spigot ,tongue and groove | plain,socket and spigot,tongue and groove |
Character
1. Short production Cycle: because of the good effect of the roller to compact the concrete, every pipe just need 3-5 minutes with high speed roller rotation.
2 .This pipe machine uses the dry cast material, there will no waste cement mud, then it won't pollute the environment.
3. During the production, the noise is low, it is about 80-90 DB.
4. The concrete pipes are with high pressure load and with high production efficiency.
Working Principle
This machine uses the Roller to support the concrete pipe mould, and produce the roller force to concrete in the mould. When the roller rotate at a high speed, the concrete in the mould will spread in the inner wall of the pipe mould and form a cement pipe with the centrifugal force, and when the mould with the inner concrete pass on the roller, the concrete between the mould and the roller will be compacted solid to form a pipe.
Concrete pipes
machine for making concrete pipes is the ideal equipment to manufacture cement pipe. Reasonable design, reliable and simple operation, accord with state standard GB11836-89. The machine can be produced different sizes of tubular products such as connection tubes, small tubes and large tubes of inner diameter of 200-2000 mm by using sand, gravel, stone chips, fly ash and slag mixed with appropriate amount of cement.
Our company
Shiyue Machinery is a professional manufacturer which is engaged in independently researching and developing, manufacturing and selling block machine,concrete pipe machine,concrete electric pole machine etc construction building machines. We have exported product to many countries, such as Mongolia, Russia, Philippines,India, Vietnam, Uzbekistan, Kyrgyzstan, Kazakhstan, Nigeria, South Africa,Oman ,Botswana, America etc. What’s more,we receive good feedback about service and quality. We are not main for sales, but also for development of the market all over the world. Do our best to satisfy customers’ need and gurantee quality is our principal .With 27 years’ brick block machine manufacture & export experience,welcome all the customers to our company and build business relationship with us.
Our services
1) Send the technicians to carry out the installation and debugging of equipment for the foreign users with compensation. Countries or regions with unstable political situation or in the throes of wartime are not included in our plan.
2) Train the users to command the equipment and guide them for safe production.
3) Explain the routine maintenance of equipment carefully and remove common faults.
4) We are responsible for all the repairs that caused by our quality problems within one year’s warranty. (We will provide one set of spare parts/wear & tear parts free of charge with shipment.)
5) For some countries whose visas are difficult obtained, customers can also send their technicians to our company to receive free guidance and training.
6) Accept suggestions for improvement put forward by customers an earnest way. In accordance with changes of the market, provide the products and services to meet the user’s needs and create value for them.
7) We will make every effort to solve your problems, and your success will add new glory to us.
FAQ
1. Q: What is the molds sizes ? i want to make a special one
A: It is no problem ,All kinds of mould can be made by customer's drawings
2.Q: How is about the payment terms ?
A: It is usally T/T 30% down payment, 70% upon machinery completion, we can also do other payment terms
3. Q:When will your side delivery the machine for me ?
A: The machine usually be shipped within 20days after the deposit,and it also depends on the other conditions
4. Q:How is about the package ?
A: Nude packing,or according to your needs
5. Q: How is about the warranty ?
A: All the machine enjoys one year’s warranty, in this period , any problems or parts
Of the machine, please feel free to contact us . We will try our best to make it .
Contact us
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier