What is Sipuxin reverse osmosis water treatment ?
The SRO water treatmen system produced by Sipuxin Company for such industries as cosmetics,
pharmacy, food and electrics has been deeply favored by users for its stable water quality and simple operation. The system solves the troubles of frequent regeneation and cleaning during the use of ion exchanging water purifier . By adopting physical principle , it enables the water to pass the reverse osmosis film with a diameter of one ten-thousandth of a micron and separates impurities , ion , microbes and colloids in the water , so as to meet the water requirements in cosmetics , pharmacy , electronics and food industries .
Features of reverse osmosis water treatment
♦ This system occupies little space , easy to operate, widely applied in many industries.
♦ No consumption of large amount of acids and alkalis, avoiding secondary pollution of water and lowering the operational cost.
♦ Desalting rate of reverse osmosis is higher than 99 %; desalting rate of the whole machine is still higher than 97%. 98% of organism , colloids and bacteria can be removed.
♦ Purified water with good electric conductivity: one stage 10μs/cm or less, two stage 2 to 3μs/cm, EDI less than or equal to 0 .5μs/cm(when that of raw water is 300μs/cm or less)
♦ High automation degree, no people attended. The machine will automatically stop in case of water sufficiency and automatically start in case of no water. The front filtering materials and the reverse osmosis films are all automatically flushed.
♦ Imported parts account for over 90%
Technical parameter of reverse osmosis water treatment
Model | Productivity (T/H) | Power (kw) | Recycle Rate (%) | Water-out Conductivity (US/CM) | Water-in Conductivity (US/CM) |
SRO-0.5 | 0.5 | 0.75 | 50 | 3-8 | ≤300 |
SRO-0.5A | 0.5 | 1.5 | 50 | 3-8 | ≤300 |
SRO-1 | 1.0 | 2.2 | 65 | 3-8 | ≤300 |
SRO-2 | 2.0 | 4.0 | 65 | 3-8 | ≤300 |
SRO-3 | 3.0 | 5.5 | 75 | 3-8 | ≤300 |
The image of the reverse osmosis water treatment
You May Like
Our Project
Our wooden case for the product are not only seaworthy, but also strong enough to protect the machine from possible damage.
1. All the equipment provided by our company, we will be responsible for the installation and commissioning of equipment acceptance to product eligibility.
2. Responsible for layout design, process design and process design of equipment.
3. Provided normal equipment training, training 2-3 engineers and technicians for the demander, fully master the production process, equipment daily maintenance, failure and production management.
4. All the equipment provided one year guaranteed.
5. Life-long maintenance: in the period of the warranty period, a free door-to-door comprehensive service is provided .