1.Radial truck tire, TBR tire
2.Design with strong structure, good load capacity
3.Good anti-wear and anti-puncture attributes
4.DOT,ECE, ISO9001,ISO14001
TUBE TRUCK TIRES:
7.50R16, 7.50R20, 8.25R16, 8.25R20, 9.00R20, 10.00R20, 11.00R20, 11.00R22, 12.00R20, 12.00R24, 14.00R20
TUBELESS TRUCK TIRES:
8.5R17.5, 8R19.5, 9R22.5, 9.5R17.5, 10R16.5, 10R22.5, 11R22.5, 11R24.5, 12R16.5, 12R22.5, 13R22.5, 215/75R17.5, 225/70R19.5, 235/75R17.5, 245/70R19.5, 255/70R22.5, 265/70R19.5, 275/70R22.5, 275/80R22.5, 285/75R24.5, 295/60R22.5, 295/75R22.5, 295/80R22.5, 315/60R22.5, 315/70R22.5, 315/80R22.5, 385/55R22.5, 385/65R22.5, 425/65R22.5, 445/65R22.5
Product Features and Technical Advantage:
1. Our product performance places the leading level in domestic .Each index of our all steel radial tires fit state standard
GB9744—2008 <LOADING AUTO TIRES>, strength character and durability test are over 100 hours, which particularly higher than the state standard of 47 hours only .
2. We have purchased the most advanced molding machines, internal mixers and other key equipments, we have built up the best production lines of TBR tires, on the aspect of hardware, such management and producing system promised the stability of TBR tires quality .
3. Using the most advanced tire structure mechanics of finite element analysis technology. It is more suitable for overloading, and wear resisting performance is more outstanding.
4. Using independent and new generation patent technology of 0°C belt layer structure, to enhance bearing capacity and durability.
5. To improve and enhance the performance of the bead, to enhance bead structure and new formulations designed to improve tear resistance, comprehensively enhance the performance of bead apex parts.
6. Using the advanced filling nitrogen vulcanization process in the tire curing process, the capsule used in the medium for the mixed gas of the high pressure steam and the high-pressure nitrogen gas, low operating costs, improve production efficiency, to improve the quality of the tire.
7. Lining layer extrusion calendaring lines outside the compound, the advanced technology of the air-cooled, airtight layer and film thermal lamination, to the improve the viscous retention rate, and the use of air-cooled system to overcome the “moisture condensation” phenomenon due to cooling-system (the temperature difference between the reasons on a roll) to improve the stickiness of the member(parts).
8. Advanced continuous low temperature mixing process, to improve the quality and yield of rubber.
9. Pre-vulcanization process using state-of-the art electron beam radiation, improve physical and mechanical properties of the components, restrain the local deformation during the various operations in the storage, before vulcanization and molding, to prevent the semi-finished parts and finished product uniformity.