Model | MS-15-5 | MS-15-12 | MS-15-15 | MS-15-24 |
Specification | ||||
DC output voltage | 5V | 12V | 15V | 24V |
DC output current | 0-3A | 0-1.3A | 0-1A | 0-0.7A |
Wave and noise | 60mVp-p | 80mVp-p | 100mVp-p | 100mVp-p |
Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity | ±1% | ±0.5% | ±0.5% | ±0.5% |
Efficiency | 68% | 71% | 72% | 75% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
AC input voltage range | 85~264VAC 120~370VDC 47~63Hz | |||
AC Impact current | Cold-start current 30A/230V | |||
Overload proctection | 105%-135% cut off the output, automatic recovery | |||
Over-voltage protection | ||||
Setup rise hold up time | 200ms, 50ms, 20ms/230VAC at full load | |||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||
Working temperature and humidity | -10°C~+50°C(Refer to output derating curve),20%~90%RH | |||
Overall dimension | 84*58*38mm | |||
Weight | 0.21Kgs | |||
Note: | ||||
1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity. | ||||
2.Error.include the setting error,line stability and load stability.(Note:5). | ||||
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. | ||||
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. | ||||
5.Load stability test:the load is from 0% to 100%. | ||||
6.C2,3,6must be knocked down. |
S Series |
|
DR Series |
|
MDR Series 10W 40W 60W 100W |
|
LPV Series 15W 20W 30W 50W 60W 100W 150W 200W 250W |
|
NES Series 15W 25W 35W 50W 75W 100W 150W 200W 350W |
|
LRS Series 35W 50W 75W 100W 150W 200W 350W |
|
PFC Function Series SP-75W SP-100W SP-150W SP-200W SP-320W SP-500W |
|
MS Series 15W 25W 35W 50W 60W 75W 100W 120W 150W |
|
More |