6 ADVANTAGES OF PRODUCT STRUCTURE
1. Newly designed grinding curves enhanced the grinding efficiency and the capacity increased by 40%. The yield is twice as large as ball mill and energy efficiency is up by 30%.
2. Adopt cage classifier, the powder-selecting efficiency is more higher. The product fineness
can be adjusted between 325-2500 meshes.
3. HGM medium speed mill adopts gas flow, open circuit fan system, higher capacity. Comparing with ordinary mill, the closed-circuit system has more ventilation, which leads a higher yield
4. More grinding rings, easier to adjust for higher fineness. 7/9pcs in each layer of the disk, 21/27 totally. The final fineness can reach D9≤75 microns one-time.
5. Adopt pulse dust collector, more efficient and environmental protection.
6. Adopt low lost and high quality of wear-resisting material on the spare parts, over one year lift time mostly.
APPLICABLE MATERIALS
HGM Micro Powder Grinding Mill machine is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs hardness under six. Such as calcite, chalk, limestone, dolomite, kaolin, gypsum, etc, totally more than 100 kinds of materials. Product fineness can be controlled between 325~2500 mesh.
PRODUCT PARAMETERS
Model |
HGM80 |
HGM90 |
HGM100 |
HGM100A |
HGM125 |
Ring Diameter(mm) |
800 |
900 |
1000 |
1000 |
1250 |
Ring Number (PCS) |
3 |
3-4 |
4 |
4 |
4 |
Roller Number(PCS) |
18-21 |
24-29 |
28-36 |
28-36 |
30-44 |
Main Shaft Speed (r. p. min) |
230-240 |
200-220 |
180-200 |
180-200 |
135-155 |
Input Size (mm) |
≤10 |
≤10 |
≤15 |
≤15 |
≤15 |
Finished Size (um/mesh) |
74-5 |
74-5 |
74-5 |
74-5 |
100-6 |
Capacity (t/h) |
0.4-4.5 |
0.6-6.5 |
1-9 |
1-9 |
2-16 |
Outlet Size L*W*H (m) |
13.9*4*6.2 |
14.7*4.8*7.2 |
18*4.6*8.6 |
18*4.6*8.6 |
14*9*10.25 |
PRODUCTION LINE
HGM series micro powder grinding mill mainly consist of main unit, classifier, dust cleaner, powder collector, blower, muffler, hammer crusher (can be replaced by jaw crusher), bucket elevator, sound-proof room, storage hopper, vibrating feeder and so on.
1. Big lump materials are crushed into required size by crusher machine.
2. The out-let materials are elevated to buffering hopper through elevator.
3. After that the materials are fed into the mill to be ground by ring and rollers.
4. The ground powders move up with the air flow to pass the separator and be collected as the finished product.
5. Those powders failed to pass the separator will fall down and be ground again.
6. Air flow passing through separator will go to the air blower for recycling.
HGM Micro Powder Mill |
HGM80 |
HGM90 |
HGM100 |
HGM100A |
HGM125 |
|
Auxiliary |
Bucket Elevator |
TH200x8.1m |
TH200x10.8m |
TH300x10.5m |
TH300x10.5m |
TB300x10.5m |
Hammer Crusher |
PC300×400 |
PC400×600 |
PC400×600 |
PC400×600 |
PC400×600 |
|
Screw Feeder |
159-1.8m |
159-1.8m |
159-1.8m |
159-1.8m |
159-1.8m |
FAQ
Q1: Why choose YuHong machinery?
A1: 1. Up-to-date design, CAD calculation and simulation;
2. ISO,BV,SGS,CE quapty control manufacturing;
3. Over 30 years experience, export to over 50 countries;
4. Highest standard to suit operators' use;
5. World class quality at affordable price.
Remarks: The price will depend on different models. Reply message ,you will get 5% discount price.
Q2: What are the requirements for HGM micro powder grinding Mill material?
A2: Our Yuhong has a high standard on choosing material of HGM micro powder grinding Mill.
1.Using very high grade steel plate (i.e. Q235, Q345) on structuring part;
2. Using wear-resistant steel (i.e. ZG35, ZGMn13, 65Mn, 35CrMo, ZG60Si2CrA) on quick-wear parts;
3. The motor, reducer, bearing, belt, bolts are Chinese top 5 brands;
4. Metallurgy performance must be considered during designing, cutting, bending, fitting&welding.
Q3: What information do we need to provide you the reasonable model and best quotation?
A3: 1. What is the raw material?
2.Raw material maximum feeding size (mm or mesh)?
3. Final products size (mm or mesh) and usage?
4. What is the capacity per hour?
HENAN YUHONG HEAVY MACHINERY CO., LTD.
Henan Yuhong Heavy Machinery Co.,LTD is a joint-stock mining machinery manufacturing enterprise integrated in scientific research,prodcution and marketing.our main products include five series ,they are the Crushing equipment ,Beneficiation equipment,Grinding Powder equipment ,Drying equipment ,Kilning equipment.YUHONG GROUP set off from "the customer for this " angle ,put self's whole heart to be that the customer provides the valuable service pattern,the effort using up 100% satisfies different customer product need.
FOR MORE INFORMATION, PLEASE CLICK HERE