Vibratory parts feeder is the machine which can orient and feed small parts to the assembly line by vibration.
Characteristic
The utility model has the advantages of small size, light weight, simple structure, convenient installation and low operating cost;
The use of half wave rectifier control, can be used in the stepless adjustment.
The feeder in the course of continuous feeding thrown the parts up, so to wear small trough.
In order to reduce the noise and improve life and feed efficiency, the inside of the bowl is usually coated by urethane.
The vibrators are controlled by control boxes.
Technical parameter for GZV vibrating feeder | ||||||||||||||||
Model | GZV1 | GZV2 | GZV3 | GZV4 | GZV5 | GZV6 | GZV8 | |||||||||
Capacity(t/h) | 0.1 | 0.5 | 1 | 2 | 4 | 6 | 8 | |||||||||
Double amplitude(mm) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |||||||||
Frequency(tim/min) | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | |||||||||
Power(w) | 5 | 8 | 20 | 25 | 30 | 50 | 100 | |||||||||
Control equipment | Model | XKZV-Ⅱ | ||||||||||||||
Control way | Controllable half wave rectifier | |||||||||||||||
Voltage | 220 | 220 | 220 | 220 | 220 | 220 | 220 | |||||||||
Frequency(HZ) | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
Current(A) | 0.08 | 0.12 | 0.15 | 0.2 | 0.25 | 0.6 | 1.0 | |||||||||
Weight | 4 | 7 | 12 | 18 | 27 | 45 | 60 |
The overall dimensions of the mainframe are shown belowr
Model | Outline dimension | ||||||||||||||||
B | B1 | B2 | B3 | L | L1 | L2 | H | H1 | |||||||||
GZV1 | 40 | 60 | 50 | 80 | 200 | 273 | 92 | 20 | 155 | ||||||||
GZV2 | 60 | 80 | 50 | 80 | 300 | 374 | 95 | 30 | 168 | ||||||||
GZV3 | 80 | 110 | 60 | 100 | 400 | 480 | 224 | 40 | 222 | ||||||||
GZV4 | 100 | 130 | 70 | 120 | 500 | 568 | 310 | 50 | 256 | ||||||||
GZV5 | 120 | 150 | 70 | 120 | 550 | 630 | 310 | 60 | 295 | ||||||||
GZV6 | 200 | 240 | 120 | 180 | 300 | 760 | 440 | 70 | 330 | ||||||||
GZV8 | 300 | 340 | 180 | 230 | 1000 | 1050 | 560 | 80 | 340 |
In order to ensure the normal operation of feeder,Should pay attention to several points in the installation of hopper.
The outlet and the feed tank should have 5mm gap,Ensure the hopperis not affected by the process of feeding.
Chute exit should design oblique,To avoid the vertical pressure direct pressure on the feeder,Otherwise it will seriously affect the efficiency of feeder.
The size of the opening of the hopper shall be guaranteed to obtain sufficient material,In order to adjust the number of materials should be set gate.
GZV series vibrating feeder for seat type structure,Install flat on the support plate
1.Q: Are you a factory or a trading company?
A: Manufacturer of Vibrator Motor.
2.Q: What are the terms of payment?
A: 30% T/T in advance, 70% before shipment, sight letter of credit, Western Union remittance or Paypel
3.Q: When is your delivery time?
A: About seven working days after receiving the deposit.
4.Q: What is your minimum requirement for this product?
A: One piece per piece.
5.Q: Can we brand on it?
A: Of course.