China Electrical insulation high voltage anti-static rubber mat safety rubber matting for workplace
Electrical insulation high voltage anti-static rubber mat safety rubber matting
Introduction:
Electrical Insulating Mats are generally used for covering the floor below the control panels. The insulating mat that we offer is mainly used for safety of workers while installing and operating electrical equipment because of possibility of leakage of current.
These insulating mats are manufactured using elastomer (latex, rubber and elastomeric compounds that might be natural, synthetic or mixture of both) all along with anti- skid aberrations on the top to avoid slippage and smooth lower surface. It is available in 1mm,2mm, 2.5mm & 3.0mm thickness depending upon the working/use voltage.
Application Area:
Near HT/LT Control Panels
Electrical Substations
Transformers, Generator & Lift Rooms
In front of Switchboards
Around Buss Bars
Outdoor/Indoor On-site use on Live EquipmentApplication Area:
Near HT/LT Control Panels
Electrical Substations
Transformers, Generator & Lift Rooms
In front of Switchboards
Around Buss Bars
Outdoor/Indoor On-site use on Live Equipment
1 Material Composition Special rubber compound of high quality natural rubber free from any insertion.
2 Tensile strength (T.S.) 50 Kg/cm2 (min.)
3 Elongation at Break (E.B.) 250% (min.)
4 Leakage Current 10 mA (max.)
5 Water Absorption 4% (max.)
6 Compression Set 10% (max.)
7 Ageing Properties at 70±1°C for 168 hours. a) T.S.: ±10% - 25% change (max.)
b) E.B.: ±10% - 25% change (max.)
8 Working Temperature 0°C to 55°C
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier