serial number | project | unit | parameter | ||||
CK6130 | |||||||
1 | Maximum swing diameter on the bed | mm | Φ300 | ||||
2 | X wizard rail span | mm | 160 | ||||
3 | Z wizard rail span | mm | 230 | ||||
4 | Maximum swing diameter on the skateboard | mm | Φ100 | ||||
5 | Top distance | mm | 350 | ||||
6 | Maximum turning length | mm | 230 | ||||
7 | The center is high | Away from the bed | mm | 150 | |||
Away from the ground | mm | 1065 | |||||
8 | Spindle through hole diameter | mm | Φ48 | ||||
9 | Stick pass diameter | mm | Φ45 | ||||
10 | With hollow card pan lever through hole | mm | Φ40 | ||||
11 | Spindle end pattern | A2-5 | |||||
12 | chuck | mm | Chuck /s160 manual chuck (optional). | ||||
13 | Spindle cone taper | No | Chuck | ||||
14 | Spindle Limit Speed | rpm | 2500 | ||||
15 | Tailstock sleeve diameter | mm | Φ52 | ||||
16 | Hole taper in the tailstock sleeve | No | MT4# | ||||
17 | Tailstock sleeve stroke | mm | 80 | ||||
18 | Tailstock configuration | Ordinary hand shake | |||||
19 | Electric knife holder knife number | handful | 4 | ||||
20 | Knife square size | mm | □20×20( four seats ) | ||||
21 | The screw model | X-way | mm | FDC2506-P3 | |||
Z to | mm | FDC3210-P3 | |||||
22 | X/Z moves quickly | m/min | 6/10 | ||||
23 | X-way trip | mm | 280 | ||||
24 | Minimum set unit | mm | 0.001 | ||||
25 | Main motor power | KW | 4 | ||||
26 | Total power supply | KW | 10 | ||||
27 | Net weight of the machine | Kg | 1700 | ||||
28 | Form factor (long× wide × high) | mm | 2200×1160×1620 |