Specifications of Tanker Body | ||
Dimension | 12000mm*2490mm*3990mm( Exact size depends on the final design) | |
Tare weight kg | About 11800KGS-13000KGS | |
Tank capacity | 30cbm-60cbm(Volume optional) | |
Shape | Optional(v or w shape) | |
Compartments | One or two compartment | |
Tanker Body Material | 5mm or 6mm/Q235 carbon steel | |
End Plate | 5mm or 6mm/Q235 carbon steel | |
Rim | 8.00-20/8.5-20/8.8-20/9.0-22.5 China Brand | |
Tire | 12R22.5/11R22.5/13R22.5/11.00R20/12.00R20( brand can be Optional) | |
Engine | Weichai 4105 Engine | |
Manhole Cover | 500mm carbon steel or aluminum alloy manhole | |
Bottom Valve | 3''/ 4” disc valve | |
Discharging Valve | Diameter is 3 or 4 inch | |
Discharging Pipe | 4” rubber hose, 2 pcs, 6m/each | |
Air compressor | 10 m3,12m3 | |
Diesel Engine | Weichai Huafeng, Tianhe 4102/4105 | |
Main Beam | Welding design or Special design, connected by bolts and nuts. Material:Q345 carbon steel Height 500mm, Upper Thickness 14~18mm, Middle Thickness 8~12mm, Down Thickness 16~20mm | |
Axle | 2 or 3 axles, BPW/FUWA brand(Optional) | |
Landing Gear | JOST(D200T)or China brand 28T(two speed) | |
Brake System | WABCO Valve with big chamber | |
King Pin | JOST 2.00 or 3.5 inch bolt-in king pin | |
Suspension | Mechanical suspension or Air suspension | |
Leaf Spring | 90(W)mm×13(Thickness)mm×10(Layer) or 100mm×12mm×12 | |
Rear ladder | Dismountable | |
Lights | Turning Light, Side Marker Light, Tail Light | |
Voltage | 24V | |
Receptacle | 7 ways (7 wire harness) | |
Painting | Complete Chassis sand blasting to clean rust, 1 coat of anticorrosive prime, 2 coats of final paint | |
ABS | Optional | |
Accessories | One standard tool box |