Online Staff: | Komi | Kevin |
Wechat:: | 1241608889 | huzongmin003 |
E-mail: | komi.shi@365ele.com | kevin.hu@365ele.com |
Mobile Number: | ---- | 13916467084 |
What is the difference between CT1005 and CT1005L and CT1005LC? CT1005 is a charge type sensor, which needs to be used with a charge amplifier. CT1005L is a piezoelectric accelerometer with the top output and a charge amplification circuit installed inside. It can be used only with a constant current adapter. CT1005L and CT1005LC have the same performance, but the position of signal output port is different. |
What is the connection between accelerometer and data acquisition equipment? The sensor is connected to IEPE port of constant current adapter through M5 to BNC cable, and then the output terminal of constant current adapter is connected to data acquisition card through BNC to pin nose cable. If it is equipped with CT9104 or CT9204 acquisition card, it can be directly connected to the data acquisition card through M5 to BNC cable. |
How to fix the accelerometer? Method 1: Usually the bottom end of the accelerometer has an M5 internal thread, which is equipped with one of our screws as standard.Customers can make male or female threads on their own equipment to fix our accelerometers. Method 2: You can choose our one-time magnetic mount to fix our accelerometer to the surface of the object to be measured. Method 3: Can be directly glued to the surface of the customer's measured object with glue. |
How to choose the accelerometer range? According to different uses, our customer service will recommend different types of sensors. Customers need to describe theproject requirements in as much detail as possible. |
If the customer wants to choose by himself, we make the following recommendations: 1. For general mechanical vibration, we recommend 50g range, CT1010L or CT1010LC. If the vibration is small, you can useCT1020LC (25g range), i f the vibration is too large, you can use CT1005L or CT1005LC (100g range). 2. For impact and blast tests, a large range of accelerometer is required. The range can be selected from CT1002L orCT1002LC (250g range), CT1001L (500g range), CT1000L (1000g range) or greater. 3. For civil engineering, earthquake monitoring, and structural testing, low frequency and small range can be considered. For example, 10g range CT1050LC, 5g range CT1100LC, or smaller range. |